Other Information
Troubleshooting
Refer to the chart below when this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung Electronics at
Symptom | Check/Remedy | |||
|
|
| ||
I cannot eject the disc. | • Is the power cord plugged securely into the outlet? | |||
| • Turn off the power and then turn it back on. | |||
|
|
| ||
The iPod fails to connect. | • Check the condition of the iPod connector and Dock. | |||
| • Keep the iPod software version up to date. | |||
Playback does not start. | • Check the region number of the BD/DVD. | |||
| BD/DVD discs purchased from abroad may not be playable. | |||
| • | |||
| • Make sure that the rating level is correct. | |||
|
|
| ||
Playback does not start | • Are you using a deformed disc or a disc with scratches on the surface? | |||
immediately when the | • Wipe the disc clean. |
|
| |
Play/Pause button is pressed. |
|
|
| |
Sound is not produced. | • The home theater does not play sound during fast playback, slow playback,and step | |||
| motion playback. |
|
| |
| • Are the speakers connected properly? Is the speaker setup correctly customized? | |||
| • Is the disc severely damaged? |
|
| |
|
|
| ||
Sound can be heard only from a | • On certain BD/DVD discs, sound is output from the front speakers only. | |||
few speakers and not all 6. | • Check if the speakers are connected properly. | |||
| • Adjust the volume. |
|
| |
| • When listening to a CD, radio or TV, sound is output to the front speakers only. | |||
| Select "PRO LOGIC II" by pressing |
| PL II (Dolby Pro Logic II) on the remote | |
| control to use all six speakers. |
|
| |
|
|
| ||
Dolby Digital 5.1 CH Surround | • Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround Sound is | |||
Sound is not produced. | produced only if the disc is recorded with 5.1 channel sound. | |||
| • Is the audio language correctly set to Dolby Digital | |||
| display? |
|
| |
|
|
| ||
The remote control does not work. | • Are you operating the remote within its operational range and within the proper angle | |||
| relative to the sensor? |
|
| |
| • Are the batteries drained? |
|
| |
| • Have you selected the mode (TV/BD) functions of the remote control (TV or BD) correctly? | |||
|
|
|
| |
• Disc is rotating but no | • Is the TV power on? |
|
| |
picture is produced. | • Are the video cables connected properly? | |||
• Picture quality is poor and | • Is the disc dirty or damaged? |
|
| |
• A poorly manufactured disc may not be playable. | ||||
picture is shaking. | ||||
|
|
| ||
|
|
| ||
Audio language and subtitles do | • Audio language and subtitles will not work if the disc does not contain them. | |||
not work. |
|
|
| |
Menu screen does not appear | • Are you using a disc that does not contain menus? | |||
even when the menu function is |
|
|
| |
selected. |
|
|
|