Radio Shack CD-8400 owner manual Troubleshooting, Self-Diagnostics

Page 17

Troubleshooting

Self-Diagnostics

The CD-8400 has a self-diagnostic function. When the CD changer detects an abnormal condition, it displays an error number on the display. If this happens, try the suggestion shown. If the error number still appears, take the CD changer to your local RadioShack store for assistance.

Symptom	Possible Cause	Suggestion


U1	The disc is not loaded properly.	Load the CD with the label side to the left.
		The CD might be dirty. Clean the CD.

		Check to see if there is a foreign object in the slot.

U2	Mechanism operation error.	Check to see if there is a foreign object in the slot.
		Unplug the power cord and plug it in again.

U3	Rack cover error.	Check to see if the rack cover is blocked by anything.
		Unplug the power cord and plug it in again.

17

Image 17

Contents Disc Compact Disc Changer Please read before using this equipmentFeatures Important Safety Instructions Contents Preparation Connecting PowerPreparation Installing the Remote Control’s BatteriesLoading CDs in the Rack Using the Remote ControlBasic Operation Loading a CD in the Single Play Slot Using the DemoBasic Operation Playing CDs Checking the Time Remaining and Elapsed on a CD Checking the Custom Group Contents Special FeaturesQuickly Selecting Tracks Searching for a Section of a TrackUsing Hi-Lite Scan Special FeaturesStoring Your Best Tracks Scanning Previous CDsPlaying Tracks in Random Order Repeating Tracks, CDs, and SequencesProgramming a Sequence Clearing a Programmed Sequence Programming a Sequence While a CD is PlayingErasing a Programmed Selection Symptom Possible Cause Suggestion TroubleshootingSelf-Diagnostics TroubleshootingCD Care Tips Care and MaintenanceSpecifications RadioShack Division of Tandy Corporation Fort Worth, Texas