Radio Shack CD-8400 owner manual Special Features, Storing Your Best Tracks, Scanning Previous CDs

Page 12

Special Features

Erasing All the CDs from a Custom Group

With the CD changer stopped, repeatedly press MODE so CUSTOM and the number of the desired group light. Then press CLEAR. (You cannot partially erase a custom group memory.)

Storing Your Best Tracks

You can save up to 20 of the tracks you like best in a special best memory, and then replay them at any time. To save a track in best memory, just press BEST while that track is playing. BEST flashes three times. To play the tracks you have saved in best memory, press BEST while the changer is stopped. The CD changer plays in the reverse order; the last track you saved plays first.

Notes:

The changer only remembers the last 20 tracks you stored in best mem- ory.

You cannot store the same track twice in succession.

You cannot save a track from a CD that is in the single play slot into best memory.

To clear a track from best memory, press CLEAR while that track is play- ing.

The best memory is kept even after you turn off the CD changer.

The changer keeps the tracks in best memory for up to 2 days in the event of a power loss.

Scanning Previous CDs

The CD changer remembers the 20 most recently played CDs and lets you review and replay them in reverse order.

To review the CDs, press PREVIOUS. PREVIOUS SCAN flashes and the changer plays 10 seconds of the first track of each of the last 20 CDs you played, starting at 1 minute into the first track on each CD. To listen to an entire CD and cancel the previous scan function, press .

To stop the previous scan function, press .

Notes:

If a track is less than 1 minute long, previous scan starts at the beginning of the track.

A CD in the single play slot is not included in the previous scan memory. Neither are any CDs played using random play, hi-lite scan, programmed play, and best selection.

The previous scan memory remains stored even after you turn off the CD changer.

The changer keeps the CDs stored in previous scan memory for up to 2 days in the event of a power loss.

Using Hi-Lite Scan

To listen to 10 seconds from each CD, press HI-LITEwhile the changer is stopped or during normal play. DISC SCAN flashes and the changer plays 10 seconds from each CD, starting at 1 minute into the first track.

To listen to 10 seconds from every track on all CDs, press HI-LITEtwice while the changer is stopped or during normal, programmed, or favorite track play. SCAN flashes and the changer plays 10 seconds from each track, starting at 1 minute into each track.

12

Image 12
Contents Please read before using this equipment Disc Compact Disc ChangerFeatures Important Safety Instructions Contents Connecting Power PreparationInstalling the Remote Control’s Batteries PreparationUsing the Remote Control Basic OperationLoading CDs in the Rack Using the Demo Basic OperationLoading a CD in the Single Play Slot Playing CDs Checking the Time Remaining and Elapsed on a CD Special Features Checking the Custom Group ContentsQuickly Selecting Tracks Searching for a Section of a TrackSpecial Features Using Hi-Lite ScanStoring Your Best Tracks Scanning Previous CDsRepeating Tracks, CDs, and Sequences Playing Tracks in Random OrderProgramming a Sequence Programming a Sequence While a CD is Playing Erasing a Programmed SelectionClearing a Programmed Sequence Troubleshooting Symptom Possible Cause SuggestionTroubleshooting Self-DiagnosticsCare and Maintenance CD Care TipsSpecifications RadioShack Division of Tandy Corporation Fort Worth, Texas