Samsung DVD-1080P7/XEL, DVD-1080P7/XSE, DVD-1080P7/XEG, DVD-1080P7/AUS Optical Cable not included

Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)

1

If using an optical cable (not included), connect the DIGI- TAL AUDIO OUT (OPTICAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (OPTICAL) terminal of the Amplifier.

If using a coaxial cable (not included), connect the DIGI- TAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) termi- nal of the Amplifier.

2

Using the video signal cable(s), connect the VIDEO, S- VIDEO, COMPONENT or HDMI OUT terminals on the rear of the DVD player to the VIDEO, S-VIDEO,COMPONENT or DVI IN terminals of your TV as described on pages 9 to 14.

3

Turn on the DVD player, TV, and Amplifier.

4

Press the input select button of the Amplifier to select external input in order to hear sound from the DVD player. Refer to your Amplifier's user manual to set the Amplifier's audio input.

or

Optical Cable (not included)

English

Coaxial Cable (not included)

Dolby digital or

DTS amp

Note

-Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears.

-Please set the audio in the menu screen according to the Amplifier. (See pages 27-28)

-The position of terminals can vary depending on the Amplifier. Please refer to the user's manual of the Amplifier.

-Please remove the dust cover before using the optical cable (not included) and put the cover on the cable again when it's not used.

15