E
Chapter 4 Installation
This chapter describes what should be checked before installation, how to set the installation environment, and what should be done during installation. Then, it describes how to install the camera and connect the cable in actual circumstances.
Before Installation
Checking the contents of the package
Be sure to check if the following items are included in the package.
Camera | Camera Holder(Mount) |
User's Manual | C Mount Adapter | Auto Iris |
|
| Lens Connector |
What should be done during installation and use
E
① Do not disassemble the camera on your own.
➁Be careful when handling the camera at all times. Do not strike the camera with your fists or shake it. The camera should be stored and treated with care to avoid any damage.
➂Do not put or operate the camera in rain or wet places.
➃Do not scrub the camera body with rough sandpaper when it is stained. Please use a dry cloth at all times.
⑤Put the camera in a cool area free from direct light. Otherwise, the camera may be damaged.
12 | 13 |