Connecting the AM Aerial |
| Connecting the FM Aerial |
|
|
|
The AM aerial (for long and medium waves) can be:
Placed on a stable surface
Fixed to the wall (you must first remove the base)
The AM aerial connector terminals are located on the rear of the system and are
There are two types of aerial, (depending on option chosen).
1 How to connect a COAXIAL TYPE aerial.
Connect a 75Ω antenna to the FM aerial terminal.
GB
marked AM ANT.
To avoid noise interference, check that the loudspeaker wires do not run close to the aerial wires.
Always keep them at least 2 inches (5 cm) away.
MIC Function (option)
Preparation
Plug the microphone with a 3.5mm phono jack into microphone terminal.
rese | BASS |
CD | CD Synchro |
EPEATisplay |
|
Power Sound
Plug the connector on the FM aerial supplied into the coaxial socket (75Ω ) marked FM on the rear of the system.
Follow the instructions given on Page 8 to tune into a radio station, and determine the best position for the aerial.
If reception is poor, you may need to install an outdoor aerial.
To do so, connect an outdoor FM aerial to the FM socket on the rear of the system, using a 75Ω coaxial cable (not supplied).
FMFM
|
|
|
FM AERIAL |
| 75Ω COAXIAL CABLE |
(supplied) |
| (not supplied) |
2 How to connect a SCREW TYPE wire aerial.
The FM aerial connector terminals are located on the rear of the system and marked FM(75Ω ).
Spread the T.form FM aerial out and attach the ends to a wall, in the position providing the best reception.
Connecting the SW Aerial (option)
1 How to connect a WIRE TYPE wire aerial.
Spread the SW aerial out and attach the ends to a wall, in the position providing the best reception.
If reception is poor (e.g. distance from transmitter too great, walls blocking the radio waves, etc.), install an outdoor aerial.
ANTENNA |
AM |
SW ANT |
CD DIGITAL OUT |
5 |