Selecting a Stored Station, To listen to Press

Searching for and Storing the Radio Stations(continued)		Selecting a Stored Station

6Adjust the volume by:

Pressing Volume or on the front panel or

Pressing the VOL. + or - buttons on the remote control

7Select the stereo or mono mode by pressing Mono/ST.

Result: The Mono indicator is displayed when selected.

8If you do not want to store the radio station found, revert to Step 4 and search for another station.

Otherwise:

a Press Program/Set.

Result: The programme number and PROGRAM are displayed for a few seconds.

b Press Tuning and to assign a programme number between 1 and 15.

c Press Program/Set to store the radio station.

Result: PROGRAM is no longer displayed and the station is stored.

9To store any other radio frequencies required, repeat Steps 3 to 8.

The Program function can be used to assign a new station to an existing programme number.

You can listen to a stored radio station as follows:

1Switch the system on by pressing On/Standby.

2Select the TUNER function by pressing TUNER/Band on the front panel.

3Select the required frequency band by pressing TUNER/Band on the remote control or TUNER/Band again on the front panel.

4Select the radio station as follows.

To listen to ...	Press ...
A stored station	a Press the Tuning Mode button
	until “PRESET” is displayed.
	b Tuning	and	to select the
	required programme.
Another station	Tuning	and	until the
	required frequency is displayed.

Press Tuning Mode again to exit the stored station selection function.

EQ Preset	Power	Program
EQ Preset	Sound	/Set	AUX

On/standby	Timer	Timer/
	On/Off	Clock

VOL.

4 4

Tuning

Mode

CDCD

VOL.

VOL.

You can improve the quality of radio reception by:

Rotating the FM or AM(MW) aerial

Testing the positions of the FM and AM(MW) aerials before fixing them permanently

If reception from a specific FM radio station is poor, press Mono/ST to switch from stereo mode to mono. The quality of the sound will be improved.

Power Sound