Samsung MM-A15R/EDC manual Rear Panel View, Connecting your System to the Power Supply

Page 4

Rear Panel View

ENG

1

2

3

4

1.FM Aerial Connector Terminal

2.AUX-Input

3.Loudspeaker Connector Terminals

4.Voltage

Where to Install Your

Micro Component System

To take full advantage of your new micro component system, follow these installation instructions before connecting the unit.

Install the system on a flat, stable surface.

Never place this unit on carpeting.

Never place this unit in an outdoor area.

Maintain an open space of approximately 6 inches (15 cm) on the sides and rear of the system, for ventilation purposes.

Make sure that you have enough room to open the compact disc com- partment easily.

Place the loudspeakers at a reasonable distance on either side of the system to ensure good stereo sound.

Direct the loudspeakers towards the listening area.

For optimum performance, make sure that both speakers are placed at an equal distance above the floor.

Connecting your System to the Power Supply

The main lead must be plugged into an appropriate socket.

Before plugging your system into a main socket, you must check the voltage.

1

Plug the main lead into an appropriate socket.

 

2

Press the (

) button to switch your micro component system on.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Inserting Remote Control Batteries

ENG

Insert or replace remote control batteries when you:

Purchase the micro component system

Find that the remote control is no longer operating correctly

When replacing the batteries, use a new set of batteries and never mix alkaline and manganese batteries.

1

Place your thumb on the position marked

 

on the battery

 

compartment cover (rear of the remote control) and pull the cover in

 

the direction of the arrow.

 

 

 

2

Insert two AAA, LR03 or equivalent batteries, taking care to respect

 

the polarities:

 

 

 

 

+ on the battery against + in the battery compartment

 

– on the battery against – in the battery compartment

3

Replace the cover by sliding it back until it clicks into position.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Range of Operation of the Remote Control

The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be operated at a horizontal angle of up to 30° from the remote control sensor.

6

7

Image 4
Contents Micro Component Audio system Safety Warnings ContentsRemote Control Front Panel ViewConnecting your System to the Power Supply Where to Install Your Micro Component SystemInserting Remote Control Batteries Range of Operation of the Remote ControlConnecting to an External Source Connecting the FM AerialConnect To the connector marked How to connect a Coaxial Type aerialTo play the CD/MP3/WMA-CD Selecting a Track Demo FunctionDimmer Function Display FunctionLast Memory Function Searching for a Specific Music Passage on a CDFunction to skip through 10 tracks at a time Repeating One or All Tracks on the Compact DiscsDelay Selecting a Track from USB DeviceTo skip next 10 tracks Checking or Changing Programmed TracksTo use high speed search To repeatTo use Last Memory function Selecting a Stored StationAbout RDS broadcasting About RDS Display functionPTYProgram Type indication and PTY-SEARCH function Description on RDS functionCancelling the Timer Timer Function EQ FunctionTreble Level Function Connecting Headphones Safety PrecautionsSetting the System to Switch off Automatically Mute FunctionPrecautions When Using Compact Discs Technical SpecificationsBefore Contacting the After-Sales Service Flex Drive XtickAH68-02147F
Related manuals
Manual 15 pages 55.12 Kb Manual 15 pages 3.64 Kb