Selecting a Track from USB Device, Delay

Checking or Changing Programmed

Tracks

ENG

You can check or change your selection of tracks at any time.

1	Press	once if you have started listening to the selection.


2	Press PROGRAM/SET button twice.
	Result: The following indications are displayed:

(01 = Program no., – – = Track no. on the disc)

If you have already programmed 24 tracks, CH is displayed instead of PG when you press PROGRAM/SET.

3	Press PROGRAM/SET one or more times until the track to be
	changed is displayed.
4	Press	or	to select a different track.


5	Press PROGRAM/SET to confirm your change.
6	Press MP3-CD/CD(√) to start listening to the selection.
	Result: The first track selected is played.

TIMER	TIMER/CLOCK	PROGRAM/SET
TIMER	2,3,5
ON/OFF
SLEEP	TREB/BASS	REPEAT
MO/ST	DEMO	DIMMER
+10	RDS DISPLAY	RDS PTY

4	DISPLAY	PAUSE	4
	STOP	PLAY6
	1

Playing USB

You can play MP3/WMA files by connecting to various external USB storage devices such as USB flash memory or HDD.

1	Connect the external USB storage device to your player.
2	Select USB function by using the USB button.
	The first track of the first directory plays automatically.
	To stop playing
	Press the Stop (	) button to stop playing.

Press the Stop ( ) button once to pause, and press the button twice to stop completely.

			2
CD	TUNER	AUX	USB
POWER
			CANCEL
TIMER	TIMER/CLOCK		PROGRAM/SET
ON/OFF
SLEEP	TREB/BASS		REPEAT
MO/ST		DEMO	DIMMER
+10	RDS DISPLAY		RDS PTY

DISPLAY PAUSE

STOPPLAY

USB/MP3-CD/CD

MUTE

Do not connect USB charging device to the USB connection port of the player, because it may cause damage to the product.

Please be aware of the followings before using USB.

Depending on the type of external USB storage device, it may not work even if it’s connected to the player.

With external HDD, FAT format can be played, but not NTFS format.

With USB 2.0 HDD, connect to a separate power source.

If it’s not connected to a separate power source, it may not work.

If memory of an external USB storage device is segmented into several parts, MP3 files of only the first hard disk drive can be played.

Regarding directories, up to fourth directory can be played.

DRM applied files are not played.

Digital Rights Management: Technology and service that protect the profit and rights of copyright owners by disallowing unauthorized use of digital contents.

Even if the file name ends with .mp3, the file does not play if actual file format is MPEG layer 1 or 2.

Disconnect the external USB storage device only in safe removal mode(“USB REMOVE” display ON/OFF). Otherwise, internal file can be damaged.

Press the Stop ( ) button more than 2 times to get into the safe removal mode.

If you want to play files in the safe removal mode, disconnect and reconnect the external USB storage device.

USB hub will not be recognized.

Directory names are shown up to 14 letters, and MP3 file names up to 30 letters.

Delay

When selecting USB function, depending of the speed of the external USB storage device, reading (READ-IN) internal information can take several minutes.

When playing a USB device, recording or finding next track may introduce some delay. Especially with a mass storage device such as HDD, depending on the type and the number of files, the delay might be several minutes.

Even with the external USB storage devices of same capacity, depending on the speed of each product, the amount of oper- ating time can vary.

If the external USB storage device supports only USB VER 1.1 and the access speed is slow, the recording may not work well or noise can be recorded.

•The USB function of this product does not support all USB devices.For the information on the supported devices,pls see the page 26.

Selecting a Track from USB Device

ENG

You can select a desired directory and an MP3 file during the play or when it stopped.

Before you begin! Connect the external USB storage device to your player. Select USB function by using the USB button.

Press the TUNING/ALBUM / buttons to move the directory.

Each time you press the button, it will move to the directory before or after and play.

This function works only in the remote control.

USB/MP3-CD/CD

MUTE

TUNING/

VOLUMEALBUM

TUNING

P.SOUNDEQMODE

If you want to move the file, press the , button shortly.

It moves the file within the directory.

If you press the , button more times than the number of the files in the directory, it will move over to the next directory.

DISPLAY PAUSE

STOPPLAY

To skip next 10 tracks

Before you begin! Connect the external USB storage device to your player. Select USB function by using the USB button.

Press the +10 button on the remote control shortly during the play. A track that is 10 tracks after the current track plays.

Example: If you want to select 43rd track while 15th track is playing, press

the +10 button 3 times and then press the button 3 times.

15 ➝ 20 ➝ 30 ➝ 40 ➝ 41 ➝ 42 ➝ 43

+10 +10 +10

MO/STDEMODIMMER

+10	RDS DISPLAY		RDS PTY
	DISPLAY	PAUSE