Samsung HW-J450/EN manual ++Installing the Battery in the Remote Control, Play/Pause, Skip Back

REMOTE CONTROL

POWER

Turns the Soundbar on and off.

VOLUME

Adjusts the volume level of the unit.

Play/Pause

Press the +# button to pause playing the file temporarily.

Press the +# button again to play the selected file.

Skip Back

If there is more than one file on the device you are playing, and you press the [ button, the previous file is selected.

SOUND EFFECT You can select different sound modes - STANDARD,MUSIC, VOICE, SPORTS, CINEMA, and NIGHT MODE - depending on the type of sources you want to enjoy.

Press the SOUND EFFECT button on the remote control. Select the STANDARD mode if you want to enjoy the original sound.

* Night Mode This will regulate and stabilize the volume level against a drastic volume change caused by a channel change or scene transition.

Bluetooth POWER Press the Bluetooth POWER button on the remote to turn the Bluetooth POWER on function on and off.

See pages 19 and 21 for details.

SOUND Press the SOUND button on the remote to add depth and spaciousness to the sound.

Press the SOUND on the remote control. Each time the button is pressed, the selection changes as follows :

ON-SURROUND SOUND  OFF-SURROUND SOUND

++Installing the Battery in the Remote Control

1.Use a suitable coin to turn the remote control's battery cover counterclockwise to remove it as shown in the figure above.

2. Insert a 3V lithium battery. Keep the	3. Use a suitable coin to
positive (+) pole facing up when inserting	turn the remote control
the battery. Put the battery cover on and	battery cover clockwise
align the '●' marks side by side as	as far as it will go to fix it
shown in the figure above.	in place.

10