Samsung HW-M450/ZG Press the indicated areas to select Up/Down/Left/Right, Up/Down Left/Right


				Press the indicated areas to select Up/Down/Left/Right.
	Up/Down/
	Left/Right	Press Up/Down/Left/Right on the button to select or set functions.
		••	Repeat
			To use the Repeat function in “USB” mode, press the Up button.
		••	Music Skip
			Press the Right button to select the next music file. Press the Left button to select
			the previous music file.
		•• Anynet+ / Auto Power Link
			You can turn Anynet+ and Auto Power Link on or off.
			Anynet+ and Auto Power Link are controlled by the Right and Left buttons
			respectively.
			–– Anynet+ : If the Soundbar is connected to a Samsung TV through an HDMI cable,
			you can control your Soundbar with a Samsung TV remote control.
			Press and hold the Right button for 5 seconds to toggle Anynet+ ON and OFF.
			–– Auto Power Link : If the Soundbar is connected to your TV through a digital
			optical cable, the Soundbar can automatically turn on when you turn on your TV.
			Press and hold the Left button for 5 seconds to toggle Auto Power Link ON and
			OFF.
			–– Anynet+ / Auto Power Link are set to ON by default.
	Bluetooth	Press to turn the Bluetooth POWER or volume restriction function on and off.
	POWER	•• Bluetooth POWER function : If the Soundbar is in standby mode and the Bluetooth
	Bluetooth		POWER function is On, when you turn on a previously connected Bluetooth device,
			the Soundbar automatically turns on and connects via Bluetooth to the device.
	POWER		–– When the Bluetooth POWER function is on, “ON-BLUETOOTH POWER” appears
			on the Soundbar display. To turn off the Bluetooth POWER function, press the
			Bluetooth POWER button once. Then “OFF-BLUETOOTH POWER” appears on
			the front display.
			–– If the “D.IN” mode is on and the Soundbar is connected to a Samsung smart TV
			released in 2017 or later, the Soundbar can be controlled with the TV remote
			control. In this mode, you cannot turn off Bluetooth POWER.
		•• Volume restriction function : Because it may damage hearing when the power is
			turned on at high volumes, it adjusts the volume to 20 when the set volume is higher
			than 20.
			–– The default value for Volume restriction is off. The set volume is maintained
			even when the power is turned off.
			–– To change the setting, press the Bluetooth POWER button on the remote
			control for 5 seconds. With the volume restriction off, “V FREE” appears on the
			front display and with the function on, “V LOCK” appears.

ENG - 23