Samsung HW-M4500/EN Press the indicated areas to select Up/Down/Left/Right, Repeat, Music Skip



Press the indicated areas to select Up/Down/Left/Right.

Up/Down/

Left/Right

Press Up/Down/Left/Right on the button to select or set functions.

••

Repeat

To use the Repeat function in “USB” mode, press the Up button.

••

Music Skip

Press the Right button to select the next music file. Press the Left button to select

the previous music file.

•• Anynet+ / Auto Power Link

You can turn Anynet+ and Auto Power Link on or off.

Anynet+ and Auto Power Link are controlled by the Right and Left buttons

respectively.

–– Anynet+ : If the Soundbar is connected to a Samsung TV through an HDMI cable,

you can control your Soundbar with a Samsung TV remote control.

Press and hold the Right button for 5 seconds to toggle Anynet+ ON and OFF.

–– Auto Power Link : If the Soundbar is connected to your TV through a digital

optical cable, the Soundbar can automatically turn on when you turn on your TV.

Press and hold the Left button for 5 seconds to toggle Auto Power Link ON and

OFF.

–– Anynet+ / Auto Power Link are set to ON by default.



Bluetooth

Press to turn the Bluetooth POWER or volume restriction function on and off.

POWER

•• Bluetooth POWER function : If the Soundbar is in standby mode and the Bluetooth

Bluetooth

POWER function is On, when you turn on a previously connected Bluetooth device,

the Soundbar automatically turns on and connects via Bluetooth to the device.

POWER

–– When the Bluetooth POWER function is on, “ON-BLUETOOTH POWER” appears

on the Soundbar display. To turn off the Bluetooth POWER function, press the

Bluetooth POWER button once. Then “OFF-BLUETOOTH POWER” appears on

the front display.

–– If the “D.IN” mode is on and the Soundbar is connected to a Samsung smart TV

released in 2017 or later, the Soundbar can be controlled with the TV remote

control.

In this mode, you cannot turn off Bluetooth POWER.

•• Volume restriction function : Because it may damage hearing when the power is

turned on at high volumes, it adjusts the volume to 20 when the set volume is higher

than 20.

–– The default value for Volume restriction is off. The set volume is maintained

even when the power is turned off.

–– To change the setting, press the Bluetooth POWER button on the remote

control for 5 seconds. With the volume restriction off, “V FREE” appears on the

front display and with the function on, “V LOCK” appears.