Samsung SNC-B2335P manual Camera Setup, Camera ID, Iris

camera setup

CAMERA SETUP

You can configure the general settings of the camera module.

For selecting and saving each menu item, refer to "How to use the menu key". (page 22)

CAMERA ID

Provide the ID and position for a camera that displays on the screen.

1.Select <CAMERA SET> - <CAMERA ID>.

2.Use the four direction (▲▼◄ ►) buttons to select a desired character.

In the lower input box of the screen, the selected character will be entered.

You can enter up to 54 characters including alphabets, numbers and special characters.

CAMERA ID

ABCDEFGHIJKLMNOPQRSTUVWXYZO 123456789 : ?_+*()/

SP►► ◄◄SP LOCATION

- - - - - - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - - - - - - - - -

3. When done, continue to select <LOCATION> to specify the display position of the camera ID.

IRIS

You can set the iris to control the intensity of radiation incoming to the camera.

1.	Select <CAMERA SET> - <IRIS>.
2.	Use the left/right (◄ ►) buttons to select either		ALC
	<ALC> or <ELC>.	LENS		DC
		LEVEL	[ 00] ---- I ----
	y ALC : Controls the luminance automatically.
		BACKLIGHT		OFF

-LENS : Select a lens to use.

-LEVEL : Select the global brightness level.

-BACKLIGHT : Select WDR or BLC.

-WDR : Defi ne the composition for weight

factor, the shutter speed in WDR level, and select outdoor or indoor for white balance setup.

-BLC (Backlight compensation) : Confi gure the backlight compensation area by defi ning the area size and location.

yELC : Controls the level electronically.

-LEVEL : Select an overall brightness level.

-BACKLIGHT : Set the area for the backlight compensation.

If you select <USER> for <AREA>, you can select the area size and location.

M If the iris is set to <ALC>, fixing the iris is your priority when you adjust AE and the shutter speed.

24_ camera setup