Samsung SNC-B2335P manual Setup screen

Page 52

setup screen

-MAC address : Displays the Ethernet MAC address. This is used for creating a DDNS address.

-IP address : Displays the current IP address.

-Subnet mask : Displays the <Subnet mask> for the set IP.

-Gateway : Displays the <Gateway> for the set IP.

-DNS server : Displays the DNS(Domain Name Service) server address.

-HTTP webserver port : HTTP port used to access the camera via the web browser. The default is 80(TCP).

-Upload port (TCP) : Used to upgrade the software ﬁ rmware, defaulted to 60004(TCP).

yIPv6 conﬁ guration : Obtains the IPv6 address to access the IPv6 network.

yVNP conﬁ guration : Set a port used to transfer video signals with the Samsung protocols.

-Device port (TCP) : Used to control the video signal transfer, defaulted to 60001(TCP).

-TCP streaming port : Video signal transfer port using TCP protocols, defaulted to 60002(TCP).

-UDP streaming port : UDP Port used to transfer video signal with the UDP Unicast protocols. The default is 60003(UDP).

-Multicast address : IP address used to transfer video signal with the UDP Multicast protocols.

The default is 225.128.1.128, and if you want to change the address, specify it ranging from 224.0.0.0 to 239.255.255.255.

-Multicast port : UDP Port used to transfer video signal with the UDP Multicast protocols. The default is 60005(UDP).

-TTL* : Set the TTL for the VNP packet.

The default is 63, and if you want to change the address, specify it ranging from 0 to 255.

yRTP conﬁ guration : You can set the RTP protocol.

-RTSP port : You can set the RTSP port.

-Streaming port : Used to transfer video signal with the RTP protocols. The default range is between 61000 and 61999.

-Multicast address : IP address used to transfer video signal with the RTP protocols.

-Multicast port : Used to transfer video signal with the RTP-protocol multicasting.

-TTL* : You can set the TTL for the RTP packet.

2.When done, click [Apply].

Your settings are saved and the system restarts. The currently opened web browser will be closed.

M If the IP router has more than one camera connected, you should conﬁgure IP and port settings differently with each other.

52_ setup screen

Image 52

Contents Network Camera Overview English Overview FCC Statement Important Safety Instructions Contents Connecting to the camera LoginInstalling ActiveX Using the Live ScreenPrecautions Installation and USE Product FeaturesRecommended PC Specifications Compatible PoE Switches IP Installer CDWHAT’S Included Compatible IP RoutersConnector AT a GlanceFront Side DescriptionRear Side PowerSystem GND Disconnect the power before proceeding Mounting the LensMounting the CS lens Mounting the C lensConnecting the Auto Iris Lens connector FocusingINSERTING/REMOVING AN SD Memory Card Inserting an SD Memory CardWhat is a memory card? Memory Card Information not IncludedRemoving an SD Memory Card Selecting a memory card that’s suitable for youContacts Lock Switch Memory Card UseMemory Card Components SdhcConnecting with Other Device Connecting to the monitorPower Supply Power NetworkConnecting to Audio Input/Output MicrophoneLINE-IN LINE-OUT Speaker Pre-AmpAudio I/O Block Diagram Microphone Speaker Pre-AmpConnecting to the I/O port box Alarm I/O Wiring DiagramHOW to USE the Menu KEY You can configure the camera settings using the Web ViewerMain Menu Factory DefaultsProfile Camera Setup You can configure the general settings of the camera moduleCamera ID IrisMotion DNRShutter SENS-UPWhite BAL DAY/NIGHTAny excessively bright area in a night scene will be masked Digital Zoom DetailAGC Color SUP ReverseZone Setup Privacy ZoneSelect the Pixel Level You will see dots on the screenFactory Default OthersOSD Color You can set the font color of the user interface The camera type may different, depend on the video signal System InfoLanguage You can check the system informationNetwork connection and setup Network connection and setup Select Status from the Settings menu of the IP RouterSetting the IP Router Connecting the Camera Directly to Local Area Networking Connecting to the camera from a local PC in the LANButtons used in IP Installer IP Address SetupURL Manual Network Setup Static IP SetupAuto Set English Auto Network Setup Dynamic IP Setup Dynamic IP Environment SetupPort Range Forward Port Mapping Setup Manual Port Range ForwardingConnecting to the Camera from a Remote PC VIA the Internet Connecting to the Camera from a Shared Local PCEx http//mfffe42.websamsung.net Connecting to the Camera Using URLConnecting via URL If the Http port is other than Normally, you wouldLogin To check the Ddns addressInstalling Activex For Windows XP Service Pack 2 usersUsing the Live Screen Setup Move to the Setup screen AboutReset Alarm SD SearchBackup To capture the snapshotTo print out the screenshot To record a videoClick on the scene to record Recorded space, recording will be forcibly ended Click OKWeb viewer Using the SD Search Viewer Screen SD Search Viewer Screen layoutAccessing the Setup Screen Default SetupTo configure the video & audio settings Brightness from 1 to Contrast Adjust the contrast fromTo configure the IP settings Setup screen Click Basic User User setup window appears To set the user accountTo set the display language When done, click Apply Selected language will be appliedClick Basic Language System Setup To set the date/timeTo update the software Alarm occurrence 1, 2 When an alarm is generatedTo check the log information Select System Log Log information list appearsTo reset the system All Restores all settings to the defaultTo set the Https Click OK to restart the systemOverlay Setup To Set IP FilteringTo set the text You can display text on the screenEvent Setup To set the event transfer functionTo test the FTP transfer Click Test Verified will be displayedSetup screen To setup the record To set an alarm imageTo set the alarm input To Set Intelligent Video Analysis Setup screen To set the scheduled transfer To set the video transfer mode Network SetupTo set the Ddns DAY Mode ITSGaming ALCCavlc TerminologyBitrate Control CBRConstant Bitrate English Specifications CS/C RAMDSP 4CIFSetup HTTPS, SSL, DhcpARP, DNS, DDNS, Vsip DdnsHttp API NtscSDK EstimationHPel Frame Rate NtscGOP size15 MPEG4 4CIF 30 FPS 15 FPS FPSMPEG4 VGA 264 VGA MPEG4 CIF 264 CIF Frame Rate PAL 25 FPS 13 FPS MPEG4 VGA Kbps 17 FPS MPEG4 CIF 264 CIF Troubleshooting Problem SolutionVerify the settings in the following sequence NTP must be properly configuredAlarm Video Transmission must be enabled Analysis settingGPL/LGPL Software License GNU General Public LicensePreamble We protect your rights with two stepsProgram, and can be reasonably Page Page How to Apply These Terms to Your New Programs No WarrantyEND of Terms and Conditions Preamble Terms and Conditions Basic Permissions Source CodeProtecting Users Legal Rights From Anti-Circumvention Law Conveying Modiﬁed Source Versions Conveying Verbatim CopiesConveying Non-Source Forms Installed in ROM Additional Terms Automatic Licensing of Downstream Recipients Acceptance Not Required for Having CopiesPatents No Surrender of Others Freedom ValidUse with the GNU Affero General Public License GNU Lesser General Public License END of Terms and ConditionsPreamble Page Page Page Page Page How to Apply These Terms to Your New Libraries OpenSSL License No Event Shall the OpenSSLOriginal SSLeay License Copyright C1995-1998 Eric Young

Related manuals

Manual 111 pages 35.42 Kb

Manual 109 pages 60.28 Kb

Manual 109 pages 16.11 Kb