Samsung HW-H430/ZF, HW-H430/TK, HW-H430/EN manual Connecting the Wireless Subwoofer

Page 11

CONNECTING THE WIRELESS SUBWOOFER

The Subwoofer's linking ID is preset at the factory and the main unit and subwoofer should link (connect wirelessly) automatically when the main unit is turned on. If the link indicator () does not light when the main unit and subwoofer are turned on, please set the ID by following the procedure below.

1.Plug the power cords of the main unit and subwoofer into an AC wall outlet.

2.Press the ID SET button on the back of the subwoofer with a small, pointed object for 5 seconds.

• The STANDBY indicator is turned off and the LINK indicator (Blue LED) blinks quickly.

3. While the main unit is powered off (STANDBY mode), press MUTE button on the remote control for 5 seconds.

4. The ID SET message appears on the main unit’s VFD display.

5. To finalize the link, turn the main unit’s power on while the subwoofer’s Blue LED blinks.

• The main unit and the subwoofer are now linked (connected).

The Link indicator (blue LED) on the subwoofer is turned on.

You can enjoy better sound from the wireless subwoofer by selecting the sound effect.

if the link indicator is not solid blue, the linking process has falied, turn off the main unit and start again from step 2.

Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

If the main unit is powered off, the wireless subwoofer will be in the standby mode and the STANDBY LED on the upper side will come on after the Link indicator (Blue LED) blinks for 30 seconds.

If you use a device that uses the same frequency (2.4GHz) near the system, interference may cause some sound interruption.

The transmission distance of the wireless signal between the main unit and sub is about 10 m, but may vary depending on your operating environment. If a steel-concrete or metallic wall is between the main unit and the wireless subwoofer, the system may not operate at all, because the wireless signal cannot penetrate metal.

If the main unit doesn't make a wireless connection, follow steps 1-5 above to retry the connection between the main unit and wireless subwoofer.

The wireless receiving antenna is built into the wireless subwoofer. Keep the unit away from water and moisture.

For optimal listening performance, make sure that the area around the wireless subwoofer location is clear of any obstructions.

ENG

●CONNECTIONS

11

Image 11
Contents Wireless Audio Soundbar 3D Sound FeaturesSafety Warnings Safety informationPrecautions Contents WHAT’S Included Getting startedBefore Reading the USER’S Manual FRONT/REAR Panel DescriptionsRemote Control Buttons and Functions Power ++Installing the Batteries in the Remote ControlConnections Installing the Wall MountConnecting the Wireless Subwoofer Looping the Power Cable around the Toroidal Core AUX Set-top boxOptical Functions Input ModeBluetooth What is Bluetooth?To connect the Soundbar to a Bluetooth device Soundconnect Bluetooth Power on Bluetooth PowerTo disconnect the Bluetooth device from the Soundbar To disconnect the Soundbar from the Bluetooth deviceBefore you connect a USB device USBWhile to reset the product Software UpgradeTroubleshooting ※※Open Source License Notice SpecificationsAppendix Area Contact Centre  Web Site Wireless Audio Soundbar Özellikler Verildiğini gösterir Güvenlik bilgileriGüvenlİk Uyarilari Önlemler TUR Bağlantilar IçindekilerBİrlİkte Verİlenler BaşlangıçKulanim Kilavu Zunu Okumadan Önce Bağlanti AçıklamalarÖN/ALT Panel USBİleri Sar Uzaktan kumandaUzaktan Kumanda Düğmeleri VE Işlevleri Uzaktan Kumanda ++Pillerin Uzaktan Kumandaya takılmasıSound Effect Duvara Montaj Tertİbatinin Monte Edİlmesİ BağlantılarBağlantilar Kablosuz Subwoofer BağlantisiToroidal FERRIT’İ SUBWOOFER’A Kurma BağlantılarAUX in AUX Gİrİşİ VeyaSes Kablosu Optical in Optİk GİrİşGiriş modu Ekran Bluetooth nedir?Fonksiyonlar Gİrİş ModuFonksiyonlar Soundbari bir Bluetooth cihazına bağlamak içinSoundconnect Bluetooth Power açık Bluetooth Power Bluetooth GÜÇBluetooth cihazının Soundbar bağlantısını kesmek için TV’niz ile eşleştirmek için USB cihazını bağlamadan önceYazilim Güncelleme Sorun Giderme Sorun gidermeSoundconnect TV eşleşmesi BaşarısızAyırma 1 kHz SpesİfİkasyonlarAmplİfİkatör Nominal çıkışİthalatçı Firma
Related manuals
Manual 1 pages 45.66 Kb Manual 294 pages 58.35 Kb Manual 84 pages 13.85 Kb Manual 84 pages 55.49 Kb