Samsung LS24A460BSU/EN manual Installing the Stand for the Wall Mount, Has stand

2-3 Installing the Stand for the Wall Mount

This product provides a stand mount of 100 mm x 100 mm / 100 mm x 200 mm (3.9 inches x 3.9 inches / 3.9 inches x 7.9 inches) that complies with the VESA specifications.

HAS stand

Stand Mount

Stand (Optional)

1.Turn the product off and unplug the power cord from the wall outlet.

2.Place a soft cloth or cushion on a flat surface to protect the panel and place the product down on the cloth so that the front of the product faces downwards.

3.Separate the stand.

4.Align the groove of the part of the product that is to be connected to the stand with the groove in the stand (desk-top stand, wall mount stand or another stand) and firmly fix the stand by fastening the screw.

• If you use a screw that is longer than the standard specifications, the inside of the product may be damaged.

•For wall mounts that are not compatible with the standard VESA specifications, the length of the screw may differ depending on the corresponding specifications.

•Do not use screws that are incompatible with the standard VESA specifications and do not assemble them using excessive force.

•This may result in damage to the product or injury due to the product falling.

•The company shall not be held liable for any damage or injury.

•The company shall not be held liable for any damage to the product or injury caused by using a stand that is not compatible with the specified specifications or due to an installation not performed by an authorized installation engineer.

•When installing the product using a wall mount, purchase a wall mount that provides at least 10 cm of space from the wall.

•The company shall not be held liable for any problems caused by using a stand that is not compatible with the specified specifications.

•Use the wall mount according to the international specifications.

2-3 Installing the Product