Using state of the art bespoke machinery combined with the latest technology, all Daryl doors and panels are coated with a glass protector in highly controlled factory conditions.
The protector acts as an invisible barrier on the glass to prevent build up of limescale, soap scum, stains and dirt. The factory applied protector will last from months to years depending on use and the hardness of water in your area. It will never crack, peel, discolour or build up. Coated surfaces are kept clean simply by rinsing or wiping with a damp cloth and regular use of Daryl Glass Cleaner.
There are two separate elements to caring for your Daryl shower door, enclosure or bath screen.
1Daryl Glass Cleaner for the regular cleaning of your shower door, enclosure or screen
2Daryl Care Kit comprising of Glass Treatment and Glass Protector suitable for use where glass protector has not already been applied or for topping up factory coated protector
Regular cleaning
•Mildew thrives in damp, unventilated areas. It is, therefore, important to always wipe down, with a soft cloth or towel, the glass and metal sections inside the shower every time it is used
•Do not allow water to remain on glass and metal sections for long periods of time
•Every week or two, use Daryl Glass Cleaner to polish the enclosure (including metal sections) ensuring all surfaces are wiped down
•In hard water areas, do not allow lime scale to build up. Stubborn deposits of lime scale can usually be removed by using a 50:50 solution of vinegar and water, which should be rinsed off thoroughly and dried after use
• Regular cleaning is required to remove the small amounts of residue that are not repelled by the Protector
- Buttons glow BLUE when pressed
Temperature
Control Knob
Warm Up/Stop Button
-glows BLUE when powered
Daryl Glass Cleaner
For occasional cleaning of glass treated with Daryl Glass Protector or for more regular maintenance of untreated surfaces, we recommend using Daryl Glass Cleaner. The Cleaner cleans and polishes without smearing or streaking and rejuvenates the Glass Protector.
Daryl Glass Treatment and Daryl Glass Protector
Available in one care kit, the Treatment and Protector are used on new or existing shower installations where Protector has not already been applied and for topping up factory coated glass after a reasonable length of time. The Treatment must always be used on existing shower installations to prepare for the Protector. The Treatment is a cleaning material that is applied to the glass to ensure it is in the cleanest condition possible prior to application of the Protector. If this process is not undertaken, there is the likelihood of locking in dust, dirt and stains under the Protector.
Daryl Protector acts as an invisible barrier on the glass to prevent the build up of lime scale, soap scum, stains and dirt. Applied like a polish, one application will last from months to years depending on use and the hardness of water in your area. It will never crack, peel, discolour or build up. Coated surfaces are kept clean simply by rinsing or wiping with a damp cloth and regular use of Daryl Glass Cleaner.
Everyday Care
Wipe down the glass and metal sections with a soft cloth or towel and warm water after each time the shower is used. Do not allow water to remain on glass and metal sections for long periods, do not allow the build up of lime scale and do not use caustic cleaners or abrasives.
Daryl showers trays
If you have a Daryl shower tray scuffs and marks on acrylic trays can often be removed by the light use of a mildly abrasive cleaner applied with a damp cloth and polished off.
Other cleaning materials
Ensure that if you use a non-Daryl cleaning product, it has a pH level between 4 & 8 and is non-abrasive. Prolonged use of cleaners with a pH level outside the specified range can cause damage to metal sections and possibly affect the safe operation of your Daryl Shower. All cleaning material (including Daryl’s) must be wiped down after application. Do not use ‘spray and leave’ cleaning products on the metal surface as these may cause damage to your door or enclosure.
Warm Up Function (Optional) | St |
1.Press the Warm Up push-button.
2.The unit delays turning on to allow you to get out of the shower.
3.The Warm Up push-button flashes for a number of
seconds until water comes out of the handset at the desired temperature.
4.When the water is at the desired temperature the unit turns off waiting for you to shower.
To Operate the Shower
1.Press the Low, Medium or High flow push-button.
2.Water will come out of the handset at the desired temperature.
3.To alter the showering temperature, turn the temperature control knob. Whilst the showering temperature stabilises, the selected flow push-button will flash.
4.Press the Stop push-button at the end of your shower.
Caution!
Anyone who may have difficulty understanding or operating the controls of any shower should be attended whilst showering. Particular consideration should be given to:
•the young
•the elderly
•the infirm
•the disabled
•anyone who suffers from a medical condition that can result in temporary incapacity (e.g. epilepsy or blackouts).
•anyone inexperienced in the correct operation of the controls.
