For Cloth Filter BAG, DUST-FULL Indicator

DJ68-00104A 10/18/01 11:53 AM Page 8

NOTE : Used dust bags can be sealed by removing the film from the paper and sticking over the suction opening.

FOR CLOTH FILTER BAG

After using,if the cloth filter bag is full of dust, clean the cloth filter bag and use it again.

DUST-FULL INDICATOR

If the “Dust-Full” indicator switch changes to “RED” while you are cleaning, the dust bag is full and must be replaced.

NOTE : If the “Dust-Full” indicator continues to display “RED” even after changing the dust bag, turn the cleaner off and check whether the hose, tube or nozzle is clogged.

MAINTENANCE OR REPLACEMENT OF THE FILTERS

INLET FILTER

The secondary filter, located behind the grille in the back of dust bag compartment, protects the motor from dirt particles.

Do not allow the filter to become clogged.

Suction power reduction or motor damage may result. If filter becomes dirty, pull off the grille and lift out filter. After cleaning the secondary filter attach it in place.

NOTE : The filters must be completely dried before being replaced in the dust compartment.