Samsung VC8828EN3G/ERP manual Important Safeguards

Page 2

DJ68-00104A 10/18/01 11:53 AM Page 2

FEATURES

Features include indicator and automatic cord rewind.

NOTE : Not all models have the same features.

IMPORTANT SAFEGUARDS

1.Read all instructions carefully. Before switching on, make sure that the voltage of your electricity sup- ply is the same as that indicated on the rating plate on the bottom of the cleaner.

2.WARNING: Do not use the vacuum cleaner when rug or floor is wet.

3.Close supervision is necessary when any appliance is used by or near children. Do not allow the vac- uum cleaner to be used as a toy. Do not allow the vacuum cleaner to run unattended at any time. Use the vacuum cleaner only for its intended use as described in these instructions.

4.Do not use the vacuum cleaner without a dust bag. Change the dust bag before it is full in order to maintain the best efficiency.

5.Do not use the vacuum cleaner to pick up matches,live ashes or cigarette butts. Keep the vacuum cleaner away from stoves and other heat sources. Heat can deform and discolour the plastic parts of the unit.

6.Avoid picking up hard,sharp objects with the vacuum cleaner as they may damage the cleaner parts. Do not stand on the hose assembly. Do not put a weight on the hose. Do not block the suction or the exhaustion part.

7.Switch the vacuum cleaner off at the machine before unplugging from the electrical outlet. Grasp the plug to disconnect cord from electrical outlet before changing the dust bag.

8.The use of an extension cord is not recommended.

9.If your vacuum cleaner is not operating correctly,switch off the power supply and consult an autho- rized service agent.

10.Do not attempt to replace a damaged power supply cord. Only the manufacturer or qualified service personnel can replace power cords. Serious injury may result.

WARNING

1.Do not use to suck up water.

2.Do not immerse in water for cleaning

3.The hose should be checked regularly and must not be used if damaged.

1

Image 2
Contents Vacuum Cleaner Important Safeguards Identifications of Parts Assembling the VACUUM-CLEANER Ready for USE Power Cord ON/OFF SwitchCrevice Dusting Auto Mode Button Control Type onlyUsing the Accessories Replacing the Dust BAG Transporting and Storing the Vacuum CleanerPark Position For Cloth Filter BAG DUST-FULL IndicatorMaintenance or Replacement of the Filters Transparent Tube Outlet FilterFor Universal Brush Usage of Floor NozzleFor RUG / Floor Selector Trouble Shooting Problem Cause RemedyCODE-NODJ68-00104A REV0.0