Notes and cautions
Charging
Note
ffIf the battery overheats during charging, it may take longer to charge.
ffWhen automatic charging is not working, please check the followings.
––Turn the emergency switch (on the bottom of POWERbot) off and on again.
––Unplug the charger's power plug and then plug it back on.
––Check whether there is any foreign matter in the charge pins and clean POWERbot and the charge pins of the charger with a dry cloth or rag.
––Check for any obstacles such as reflective objects, chairs, etc. near the charger.
ffIf POWERbot is left detached from the charger, the battery will drain naturally.
––Try to keep POWERbot being charged on the charger. (Turn off the emergency switch and leave the charger unplugged when planning to leave the house for long periods of time by going on a business trip or vacation, etc., )
In use
Note
ffThe POWERbot may get caught on thresholds, etc. during cleaning.
––To restart operation, shut off the emergency switch, move POWERbot to an area where it can move easily and then turn on the power again.
ffThe POWERbot cannot completely clean areas it cannot enter, such as corners, between the wall and sofa, etc.
––Please use another cleaning tool to clean them regularly.
ffThe POWERbot cannot vacuum clumps of dirt, so some may remain on the floor after cleaning.
––Please use another cleaning tool to clean them regularly.
ffIf the battery becomes low during Auto clean mode, POWERbot will recharge and finish cleaning the remaining area after recharging. (Repeat cleaning frequency: 1 time)
ffYou cannot select and execute Manual clean mode while charging.
––If you press Manual clean / Point cleaning button while charging, the POWERbot will be detached from the charger and then turn into the standby mode.
ffDo not unnecessarily move POWERbot or press buttons while it is in Auto clean mode. It assumes that cleaning is complete and starts cleaning again from the beginning.
Cleaning and maintenance
Note
ffIf you washed the dustbin and filter with water
––Dustbin: Completely wipe out the water.
––Filter: Completely dry it in a shade before use.
Caution
ffWatch your finger when attaching or detaching the filter, since they may get stuck in the dustbin's intake.
ffTo avoid blockages by foreign matter, do not let toothpicks, cotton swabs etc. from being vacuumed by POWERbot.
ffIf it is difficult to remove foreign matters from the Power brush, contact a service center.
ffSince the power brush removes dirt from the floor during cleaning, foreign matters such as thread, long hair, etc. may get caught in it.
Therefore check and clean it regularly.