
1. Networked standby mode
1.1Test result where all NTW wired ports are connected and all NTW wireless ports activated ( This value could exceed requirement limit )
Test date
2016 .1.5
Power Consumption (W)
(rounded to the 1st decimal place)
2.8
1.2 The number and type of network ports ( it shall be declared if the same physical network port accommodates two or more types of network ports )
Logical Ports: 1 x Ethernet (100BaseT) (Position : Rear side of equipment)
Physical Ports: 1 x Ethernet
1.3Test result and information for each type of network port:
(a)The ( maximum ) power consumption
(b)The default time after which the power management function, or a similar function, switches the equipment into a condition providing networked standby
(c)The trigger that is used to reactivate the equipment
(d)The ( maximum ) performance specifications
(e)The communication protocol used by the equipment
| NTW Port | (a), W | (b), min | 
 | (c) | 
 | (d) | 
 | (e) | ||
| Ethernet | 2.6 | N/A | IP traffic / ICMP ping | 
 | 100 Mbps | Ethernet protocol | ||||
| 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
| - | - | - | 
 | 
 | - | 
 | - | 
 | 
 | - | 
| 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
| - | - | - | 
 | 
 | - | 
 | - | 
 | 
 | - | 
| 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
| - | - | - | 
 | 
 | - | 
 | - | 
 | 
 | - | 
| 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
| - | - | - | 
 | 
 | - | 
 | - | 
 | 
 | - | 
| 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
| 1.3 Test parameters | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | |
| 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | |
| parameters | 
 | Actual | 
 | Limit | parameters | 
 | 
 | Actual | Limit | |
| Ambient temperature (℃) | 26.0 | 
 | 23±5 | Test voltage (V) | 
 | 
 | 230 | 230±2.3 | ||
| Test frequency (Hz) | 50 | 
 | 50±0.5 | Total harmonic | distortion | 
 | 1.42 | 2 | ||
| 
 | 
 | 
 | 
 | 
 | (%) | 
 | 
 | 
 | 
 | 
 | 
| Crest factor | 
 | 1.40 | 
 | 1.34~1.49 | - | 
 | 
 | - | - | |
| 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
1.5Whether all network ports are deactivated before delivery Not all network ports are deactivated before delivery
1.6Whether the equipment qualifies as HiNA equipment or equipment with HiNA functionality ( where no information is provided, this is considered not to be the case )
N/A
1.7Instrumentation
Test instruments which were used in the test are as follows;
2