Samsung UE22H5610AYXZT manual Risk of Electric Shock do not Open

Page 2

Warning! Important Safety Instructions

(Please read the appropriate section that corresponds to the marking on your Samsung

product before attempting to install the product.)

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.

This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

This symbol alerts you that important literature concerning operation and maintenance has been included with this product.

The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.

-- Do not cover this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided. -- Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight.

-- Do not place a vessel containing water (vases etc.) on this apparatus, as this can result in a risk of fire or electric shock.

Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorised dealer immediately. Make sure to pull out the power cord from the outlet before cleaning.

This apparatus use batteries. In your community there might be regulations that require you to dispose of these batteries properly under environmental considerations. Please contact your local authorities for disposal or recycling information.

Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plug end, adaptors and the point where they exit from the appliance.

To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local electrical supply.

Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.

To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.

Make sure to plug the power cord in until it is firmly inserted. When removing the power cord, make sure to hold the power plug when pulling the plug from the outlet. Do not touch the power cord with wet hands.

If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorised dealer or service centre.

Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially when children, elderly or disabled people will be left alone in the house).

-- Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to generate sparks and heat or the insulation to deteriorate.

Be sure to contact an authorised service centre, when installing your set in a location with heavy dust, high or low temperatures, high humidity, chemical substances and where it operates for 24 hours such as the airport, the train station etc. Failure to do so may cause serious damage to your set.

Use only a properly grounded plug and receptacle.

-- An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

Do not allow children to hang onto the product.

Store the accessories (battery, etc.) in a location safely out of the reach of children.

Do not install the product in an unstable location such as a shaky self, a slanted floor or a location exposed to vibration.

Do not drop or impart any shock to the product. If the product is damaged, disconnect the power cord and contact a service centre.

Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, aerial freshener, lubricant or detergent. This may damage the appearance or erase the printing on the product.

Apparatus shall not be exposed to dripping or splashing. Do not dispose of batteries in a fire.

Do not short circuit, disassemble or overheat the batteries.

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

*Figures and illustrations in this User Manual are provided for reference only and may differ from the actual product appearance. Product design and specifications may change without notice.

CIS languages (Russian, Ukrainian, Kazakhs) are not available for this product, since this is manufactured for customers in EU region.

English - 2

Image 2
Contents LED TV Risk of Electric Shock do not Open Whats in the Box? Attaching the TV to the Stand Installing the Wall Mount KitWall Mount Kit Specifications Vesa Providing Proper Ventilation for Your TV Other CautionsTo Avoid the TV from Falling Arrange the cables using the Cable HolderSecuring the TV to the Wall Connecting devices to your TV Using the CI or CI+ CardNetwork Connection Wired Connecting to a NetworkNetwork Connection Wireless TV Rear Panel LAN Port on the Wall Remote Control Opens the OSD MenuInstalling the batteries Battery size AAA Turning on the TVChanging the TV’s password Initial setupPassword Change Selecting the video sourceSetting Up the Universal Remote Control Controlling External Devices with the TV RemoteLoading Pages using Keywords Viewing more TV featuresAdditional e-Manual Features Launching the e-ManualUpdating the e-Manual to the Latest Version Using the History to Load Previously Read PagesAccessing the Menu from the e-Manual Try Now Loading Pages from the IndexTroubleshooting External devicesEnglish How Does it Work? What is Remote Support?Storage and Maintenance TV Specifications Standby modeRecommendation EU Only LicencesStill image warning This page is intentionally Left blank Avvertenza! Istruzioni importanti di sicurezza Contenuto della confezione Specifiche del kit di montaggio a parete Vesa Installazione del kit di montaggio a pareteMontaggio del televisore sul piedistallo Garantire unadeguata ventilazione al televisore Altre precauzioniPer evitare una eventuale caduta del televisore Fissaggio del televisore alla pareteDisporre i cavi utilizzando il reggicavo Collegamento dei dispositivi al televisore Uso della Scheda CI o CI+Connessione di rete Cablata Connessione di rete WirelessConnessione alla rete Adsl / Vdsl / TV via cavo Telecomando Più frequentemente GuideAccensione del televisore Inserimento delle batterie tipo AAAImpostazione iniziale Cambio passwordModifica della password del televisore Selezione della sorgente videoConfigurazione del telecomando universale Controllo dei dispositivi esterni con il telecomando TVFunzioni e-Manual supplementari Vista di altre funzioni TVAvvio delle-Manual Se la descrizione è lunga e comprende più di una paginaCaricamento delle pagine dalla pagina dellindice Accesso al Menu dalle-Manual Prova oraAggiornamento delle-Manual allultima versione disponibile Caricamento pagine di riferimentoRisoluzione dei problemi Verificare che la presa a parete sia funzionanteItaliano Come funziona? Cosè lAssistenza remota?Conservazione e manutenzione Specifiche TV Modalità StandbyRaccomandazioni Solo UE LicenzeAvvertenza per la visualizzazione di immagini fisse Diagrammi a blocchi Achtung! Wichtige Sicherheitshinweise Inhalt der Verpackung? Spezifikation Vesa der Wandhalterung Befestigen des Fernsehgeräts am StandfußAnbringen der Wandhalterung Ausreichende Belüftung Ihres Fernsehgeräts Weitere VorsichtsmaßnahmenSo verhindern Sie, dass das Fernsehgerät herunterfällt Befestigen des Fernsehgeräts an der WandOrdnen Sie die Kabel mit Hilfe des Kabelhalters Anschließen von Geräten an Ihren Fernseher Verwenden der „CI- oder „CI+-KarteNetzwerkverbindung Kabel Verbinden mit einem NetzwerkNetzwerkverbindung Drahtlos IP-Router mit DHCP-Server Fernbedienung Einschalten des Fernsehgeräts Einsetzen von Batterien Batteriegröße AAAÄndern des Kennworts Hiermit wählen Sie die Videosignalquelle ausAnfangseinstellung Ändern des Kennworts für das FernsehgerätEinrichten der Universalfernbedienung Weitere Funktionen im e-Manual Anzeigen weiterer FernsehfunktionenStarten des e-Manual Wenn eine Beschreibung nicht auf einen Bildschirm passtVerwenden von Verlauf, um zuvor geladene Seiten anzuzeigen Aktualisieren des e-Manual auf die neuste VersionLaden von Seiten aus dem Index heraus Zugriff auf das Menü aus dem e-Manual Jetzt testFehlerbehebung Hinweise zum Öko-Sensor und zur Bildschirmhelligkeit Wie funktioniert das? Was ist Fernunterstützung?Lagerung und Wartung Technische Daten des Fernsehgeräts Standby-ModusEmpfehlung Nur EU LizenzenWarnung bei Standbildern This page is intentionally Left blank
Related manuals
Manual 9 pages 45.87 Kb Manual 239 pages 24.1 Kb Manual 9 pages 38.15 Kb Manual 239 pages 51.3 Kb Manual 9 pages 54.7 Kb Manual 9 pages 38.73 Kb Manual 1 pages 55.82 Kb Manual 239 pages 50.55 Kb Manual 239 pages 17.16 Kb