Samsung UE55D6000TPXZT, UE46D6000TPXZT manual Connecting to a Common Interface slot, Mounting

Page 12

Connecting to a COMMON INTERFACE slot

Attaching the CI Card Adapter

Attach the adapter as shown below.

To connect the CI CARD Adapter, follow these steps.

We recommend attaching the adapter before installing the wall mount, or inserting the “CI or CI+ CARD.”

1. Insert the CI CARD Adapter into the two holes on the

TV Rear

 

product 1.

 

Please find a two holes on the rear of the TV. A two holes is beside the COMMON INTERFACE port.

2.Connect the CI CARD Adapter into the COMMON INTERFACE port on the product 2.

3.Insert the “CI or CI+ CARD”.

We recommand that you insert the CI card before you mount the TV on a wall.

It may be difficult to insert

after the

mounting.

Insert the card after attaching the CI CARD Adapter, on TV.

It is difficult to attach the

module if

you insert the card before attaching.

Using the “CI or CI+ CARD”

To watch paid channels, the “CI or CI+ CARD” must be inserted.

•• If you don’t insert the “CI or CI+ CARD,” some channels will display the message “Scrambled Signal”.

•• The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.

•• When the configuration of channel information has finished, the message “Updating Completed” is displayed, indicating the channel list is updated.

NOTE

xx You must obtain a “CI or CI+ CARD” from a local cable service provider.

xx When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it.

xx Insert the “CI or CI+ CARD” in the direction marked on the card.

xx The location of the COMMON INTERFACE slot may be different depending on the model.

xx “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer. xx If you have any problems, please contact a service provider.

xx Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen.

English - 12

Image 12
Contents Czech BN68-03469C-01For more information on how to use the e-Manual p Securing the Installation SpaceDigital TV notice Still image warningAccessories Assembling the Holder-Wire standAV / Component Adapter Features Buttons on the remote controlWould use the and buttons on the remote control Viewing the Control PanelViewing the Remote Control Installing batteries Battery size AAAConnecting to an Antenna Changing the Input SourcePlug & Play Initial Setup Connecting to an AV devices Using an Hdmi or an Hdmi to DVI cable up to 1080pComponent connection Connecting to a PC and Audio device IBMUsing an Optical Digital or a Headphone Connection Digital Audio OUT OpticalConnecting to a Common Interface slot MountingInsert the card after attaching the CI Card Adapter, on TV It is not supported when the network speed is under 10 Mbps Network ConnectionLAN Port on LAN AdapterThis function is not enabled in some menus MENUm→ Support → e-Manual → EntereTo return to the previous screen, press the Return button Try Now Displays the corresponding menusZoom Magnifies a screen Index Displays index screen Installing the Wall Mount Vesa Spec. a * B Standard Screw Quantity 75 X200 X 400 XTroubleshooting Issues Solutions and ExplanationsLicence List of Features Storage and MaintenanceSecuring the TV to the wall Specifications EN 60065 2002+A12006+A112008 EN55022 2006+A12007EN61000-3-22006 This page is intentionally Left blank Messa in sicurezza della posizione di installazione Ulteriori informazioni sulluso del Manuale elettronico pAvviso relativo alla trasmissione TV digitale Avvertenza per la visualizzazione di immagini fisseAccessori AV / Adattatore componentPuò essere richiesto un rimborso se Montaggio del Piedistallo con fermacavoVista del Pannello di controllo Modalità standbyQuesto tasto come si usa il tasto Enter Edel telecomando TelevisoreVista del telecomando Inserimento delle batterie tipo AAAModifica della sorgente di ingresso Collegamento allantennaConfigurazione di rete Plug & Play Impostazione inizialeSeleziona della lingua Collegamento a un dispositivo AV Uso di un cavo Hdmi o HDMI-DVI fino a 1080pConnessione Component Connessione a un PC e a un dispositivo audio Uso di un cavo HDMI, HDMI-DVI o D-subUso di un collegamento ottico digitale o cuffie Connessione a uno slot Common Interface Inserire la Scheda CI o CI+Connessione di rete MENUm→ Supporto → e-Manual → Entere Uso della GuidaGuida e-Manual Questa funzione non è disponibile in alcuni menuReturn Installazione del supporto a parete SamsungSpec. Vesa a * B QuantitàProdotti 19~22 75 X 23~27 200 XProblemi Soluzioni e spiegazioni Ricerca e risoluzione guastiLicenza Elenco delle funzioni disponibili Conservazione e manutenzionePulire il prodotto con un panno morbido appena inumidito Fissaggio del televisore alla parete Specifiche Altre informazioni This page is intentionally Left blank Weitere Informationen zur Verwendung des e-Manuals p Hinweis zu DigitalfernsehenWarnung bei Standbildern Absichern des AufstellbereichsZubehör Fernbedienung und 2 Batterien Typ AAAAV / Komponentenadapter Verwaltungskosten werden abgerechnet, wennBedienfeld SourceeFernbedienung Einlegen von Batterien Batteriegröße AAAÄndern der Eingangsquelle Anschließen an eine AntennePlug & Play Anfangseinstellung Dies kann je nach Netzwerkstatus einige Zeit dauernWählen Sie das gewünschte Land aus So setzen Sie diese Funktion zurückAnschließen an ein AV-Gerät Mit Hilfe eines HDMI- oder HDMI/DVI-Kabels bis zu 1080pKomponentenanschluss Anschließen an einen PC und ein Audiogerät Anzeigemodi D-Sub- und HDMI/DVI-Eingang60 Hz Audioverbindung Anschließen an den Common INTERFACE-Steckplatz Befinden sich neben dem Common INTERFACE-AnschlussNetzwerkverbindung TV-Funktionen Ihres Fernsehgeräts MENUm→ Unterstützung → e-Manual → EntereManual-Anleitung Diese Funktion steht in einigen Menüs nicht zur VerfügungMethode Anzeigen der Inhalte MethodeAnzeigen der Inhalte Oder dkönnen Sie durch das vergrößerte Fenster blätternAnbringen der Wandhalterung Spezifikation Vesa der Wandhalterung VESA-Spezifikation StandardschraubeProbleme Lösungen und Erklärungen FehlerbehebungLizenz Liste der Funktionen Lagerung und WartungBefestigen des Fernsehgeräts an der Wand So verhindern Sie, dass das Fernsehgerät umkipptTechnische Daten Sécurisation de lespace dinstallation Avis concernant le téléviseur numériqueAvertissement dimage fixe Evitez dafficher longuement la même chaîne de télévisionAccessoires Installation du support du serre-câblePrésentation du panneau de configuration Présentation de la télécommande Installation des piles type de pile AAAChangement de la source dentrée Modifier favorisModif. Nom RafraîchirPlug & Play configuration initiale DutilisationProfitez de votre Si vous souhaitez réinitialiser cette fonctionConnexion à un périphérique AV Utilisation dun câble Hdmi ou Hdmi vers DVI jusquà 1080pConnexion à composantes Connexion entre un PC et un périphérique audio RemarqueConnexion audio Connexion à un port Interface Commune Connexion réseau Modem externeMenu m→ Assistance → e-Manual → Enter E Cette fonction nest pas disponible dans certains menusMéthode Affichage du contenuInstallation du support mural MuraleMurale Vesa ÉlectrocuterPouces Vis standard Quantité Produits 19~22 75 X 23~27 200 XRésolution des problèmes Problèmes Solutions et explicationsListe des fonctions Stockage et entretienFixation du téléviseur au mur MurCaractéristiques techniques EN550222006+A12007 EN61000-3-31995+A12001+A22005Joong Hoon Choi / Responsable du Laboratoire
Related manuals
Manual 46 pages 49.5 Kb Manual 318 pages 44.26 Kb Manual 2 pages 34.04 Kb Manual 2 pages 48.84 Kb Manual 318 pages 62.21 Kb Manual 318 pages 39.76 Kb