Samsung BD-D8500M/XU manual Network Settings, Wired Network, Windows XP

3.Insert the CAM with the “CI CAM with CI or CI+ CARD” into the common interface slot, in the direction of the arrow so that it aligns parallel with the slot.

4.Check if you can see a picture on a scrambled signal channel.

✎NOTE✎

`` This Device is work with CI and CI+ CAM.

But in case of some local DVB-T association, this device doesn't have perfect compatibility with all kinds of CAM.

If there is a problem, pull the CAM CARD out of the Set and insert it into the slot again.

Network

Before you begin, contact your ISP to find out if your IP address is static or dynamic. If it is dynamic, and you are using a wired or wireless connection, we recommend using the Auto procedures. If you are using a wireless connection and your router has the capability, you can use WPS(PBC) or One Foot Connection.

If your IP address is static, you must use the manual set up procedure for both wired and wireless connections.

Network Settings

To begin setting up the network connection for your product, follow these steps:

1.In the Home menu, press the ◄► buttons to select Settings, and then press the ENTER button.

2.Press the ▲▼ buttons to select Network, and then press the ENTER button.

3.Press the ▲▼ buttons to select Network Settings, and then press the ENTER button.

4.Press the ▲▼ buttons to select Wired,

Wireless (general), WPS(PBC) or One Foot Connection, and then press the ENTER button.

5.If you have a wired network, go to Wired Network below. If you have a wireless network, go to Wireless Network on pages 46~49.

Wired Network

ƒƒ Setting Up a Wired Connection - Auto

1.Press the ▲▼ buttons to select Wired.

Settings

Display		Network Settings
Audio	Select a network connection type.
Channel	Wired
Network	Wireless
System	(general)	Connect to the network using a LAN cable. Please make
Language	WPS(PBC)
Security	One Foot	sure that the LAN cable is connected.
General	Connection
Support		>Move "Enter 'Return

2.Press the ENTER button.

The Network Status screen appears. The product connects to the network after the network connection is verified.

ƒƒ Setting Up a Wired Connection - Manual

If you have a static IP address or the Auto Setting does not work, you’ll need to set the Network Settings values manually.

To view your Network Settings values on most Windows computers, follow these steps:

Windows XP

1.Right click the Network icon on the bottom right of the Windows desktop.

2.In the pop-up menu, click Status.

3.On the dialog that appears, click the Support tab.

4.On the Support tab, click the Details button. The Network settings are displayed.

Windows 7

1.Click the Network icon on the bottom right of the Windows desktop.

2.In the pop-up menu, click Network and Sharing Centre.

3.On the dialog that appears, click the Local Area Connection or Wireless Network Connection depending on your network connection.

4.On the Support tab, click the Details button. The Network settings are displayed.

05 Setup

English 45