Editing the Scheduled List

~TITLE : To label the title name, press the RED(A) button. Title renaming screen appears.

Follow steps 4 and 5 of “Renaming (Labelling) a Title” on pages 81~82.

.After selecting the set up value for each mode, press the OK button to select Save.

~’ will appear on the front panel. It means that a timer recording is registered.

If the timer settings overlap;

The programmes are recorded in order of priority. After recording of the first programme is complete, the second programme starts being recorded.

To exit without saving the current setting

Press the EXIT () button.

To return to the previous menu

Press the RETURN button if you don’t want to set a timer recording.

.Turn the power off to finish the Timer Recording setting. Timer Recording will not work when the power is on.

M	` The timer recording time may differ from the set time depending on disc status and overall timer recording status
	(for example, recording times overlapping, or when the previous recording ends within 2 minutes before the start
	time of the next recording.)
	` You can make up to 12 Timer Recordings.
	` If HDD disk has no available recording space, ’ blinks. It means that HDD disk has no space to record.
	` If you have set the Timer Recording using VPS/PDC, the fan can still operate and make a noise when the power is off.

Follow these directions to edit the Scheduled List.

To setup, follow steps 1 to 2 in “Making a Timer Recording” on page 77.

.Press the ▲▼ buttons to select the number of the Scheduled List you want to edit, then press the OK button.

~Edit the items you want to modify. See the “Making a Timer Recording” section for more information on Timer Recording Input items. (See pages 77~78)

.Press the OK button to confirm the edited setting.

.Press the EXIT () button after finishing the operation. The Scheduled List screen will disappear.

Adding a Scheduled List

Follow these directions to add an entry from the Scheduled List

To setup, follow steps 1 to 2 in “Making a Timer Recording” on page 77.

.Press the ▲▼ buttons to select the number of the Scheduled List, then press the RED(A) button.

~Set the items you want to add. See the “Making a Timer Recording” section for more information on Timer Recording Input items.(See pages 77~78)

.Press the OK button to confirm the added setting.

.Press the EXIT () button after finishing the operation. The Scheduled List screen will disappear.