Description-Front Panel, Rear Panel | Samsung DVD-M105/XET manual

Description-Front Panel

R	L	SETUPSETUP

•When the unit is first plugged in, the indicator lights. When STANDBY/ON is pressed on again, the light goes out and the player is turned on.

2DISC TRAY

•Load the disc here.

3DISPLAY

•Operation indicators are displayed here.

4OPEN/CLOSE

•Press to open and close the disc tray.

5PLAY/PAUSE

•Begin or pause disc play.

6STOP

•Stops disc play.

7SKIP

•Use to skip a scene or music.

1	DIGITAL AUDIO OUT JACKS
	• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.
	Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
2	ANALOG AUDIO OUT JACKS
	• Connect to the Audio input jacks of your television, audio/video receiver, or VCR.
3	VIDEO OUT JACK
	• Use a video cable to connect to the Video input jack on your television.
4	S-VIDEO OUT JACK
	• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality
	picture. The S-Video must be selected in the VIDEO OUT SELECT.
5	VIDEO OUT SELECT SWITCH
	• Use the switch to set video out.
	• If Scart Jack is selected, S-Video will not work.

1Angle indicator. You can select multiple angles of a scene recorded by different cameras.

2Disc type indicators

3Reverse play / Pause / Forward play

4Lights when 3D surround is turned on.

5DVD : Title number

6DVD : Chapter number.

7Video/Audio CD : Track number

8Repeat play mode

9Linear PCM audio output

10PAL indicator

11Dolby Digital Disc

12DTS (Digital Theater System) output

13MPEG-2 Audio output

14Displays various messages concerning

operations such as PLAY, STOP, LOAD, RANDOM, ...

no DISC : No disc loaded.

OPEN : The disc tray is open.

LOAD : Player is loading disc information.

	• If S-Video is selected, Scart Jack will not work.
6	SCAT JACK
	• Connect to a TV with scart input jack.