Samsung HT-DS110TH/XSP manual FM antenna connection, AM antenna connection, Cooling Fan

Page 14

1p~32p(DS110)-NOR-GB 9/17/04 8:42 AM Page 16

Connecting the FM and AM Antennas

If AM reception is poor, connect an outdoor AM antenna(not supplied).

FM Antenna (supplied)

IMPEDANCE SUBWOOFER : 3Ω

FRONT / CENTER / REAR : 6Ω

CENTER	REAR	FRONT
	L	L
SUBWOOFER	REAR	FRONT
	R	R

AM Loop Antenna (supplied)

Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna.

VOLTAGE

SELECTOR

FM antenna connection

1.Connect the FM antenna supplied to the FM 75Ω

COAXIAL terminal as a temporary measure.

2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.

•If reception is poor, connect an outdoor antenna. Before attaching a 75Ω coaxial cable (with a standard type connector), disconnect the supplied FM antenna.

AM antenna connection

1.Connect the AM loop antenna supplied

to the AM and terminals.

2.If reception is poor, connect an outdoor single vinyl-covered wire to the AM terminal. (Keep the AM loop antenna connected).

Cooling Fan

IMPEDANCE SUBWOOFER : 3Ω

FRONT / CENTER / REAR : 6Ω

CENTER	REAR	FRONT
	L	L
SUBWOOFER	REAR	FRONT
	R	R

The cooling fan dissipates the heat generated inside the unit so that the unit can be operated normally. The cooling fan is activated automatically to supply cool air to the unit.

Please observe the following cautions for your safety.

•Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise and may damage it.

•Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)

13

Image 14

Contents Digital Home Theater System Safety Warnings Class 1 Laser ProductPrecautions PreparationFeatures Multi-Disc Playback & AM/FM TunerContents Playable Discs Copy ProtectionDisc Recording Format Description Rear Panel Remote Control DescriptionInsert Remote Batteries Connecting to the Speakers Back of the Speakers Cooling Fan FM antenna connectionAM antenna connection Video Better Quality Connecting the Video to TVComposite Video Good Quality Component Video Best QualityConnecting to External Components Selecting the Video Format Press Stop buttonLoad a disc Disc PlaybackPress OPEN/CLOSE button to open the disc tray To stop playback Press Stop during playbackMP3 -CD Playback Press Slide Mode button Jpeg File Playback JpegPress Cursor , , , buttons during playback Press DigestPress Cursor , , , buttons Appears on the TV screen Displaying Disc InformationPress Info button Press the Remain button Each time the Remain button is pressedPress Slow button Fast/Slow PlaybackPress and hold Playing Frame by Frame DVD VCD Skipping Scenes/SongsBriefly press Repeat Playback Press Repeat buttonPress Info button twice Press EnterAngle Function Angle displayButton Zoom FunctionPress Zoom Press EZ View buttonSelecting Audio/Subtitle Language 1Press Info button twicePress the numeric 1Press Info buttonTime display Select the desired Press CursorButtons to Press Menu Using the Title MenuPress Menu button to exit the setup screen Button to move toSetting the Language Press Enter buttonPress Enter Press Cursor Press Enter buttonSetting TV Screen type Adjusting the TV Aspect Ratio Screen Size WideSetting Parental Controls Rating Level Enter the password Press Cursor , buttonPress Cursor button Setting the PasswordPress Menu 1button AV Sync Setup Press the Menu button Press Cursor , buttonsPress Open Setting the Wallpaper Jpeg DVD VCDDuring playback, press Press to select Press Menu Button ‘Setup’ and thenPress Menu Press Cursor Button to move to Press Enter button Press Cursor Setting the Speaker ModeSpeaker Enter button Setting the Test Tone‘Audio’ and then Press Test Tone buttonSetting the Delay Time Setting up the Speaker Delay Time3to move to ‘DELAY TIME’ and then press Enter button Setting the Audio Quality Enter button Press Cursor buttonMethod 2 When manually adjusting with the Sound Edit button Press SoundPress Cursor , to adjust the ‘DRC’ Press Menu buttonSound Field DSP/EQ Function Press DSP/EQ buttonDolby Pro Logic II Mode Press PL II Mode buttonDolby Pro Logic II Effect Press PL II ModeButton to select ‘MUSIC’ mode Press PL II Effect buttonMain Unit Remote Control UnitListening to Radio Number Presetting StationsTo preset another Press Sleep button To confirm the sleep timer setting, press Sleep buttonConvenient Functions Press Dimmer button Press Mute buttonFrom a few speakers Before Calling for ServiceSymptom Check/Remedy Disc tray does not open Strange noise is heard Symptom Check/RemedyPicture quality is poor Handling and Storing Discs Handling discsDisc Storage Specifications VI UHT-DS110 Number This Appliance is Manufactured by