Setting the Test Tone
Press the Test Tone to check the speaker connections and to adjust the speaker levels.
1 |
| 2 | Press Cursor | 3 | Press Cursor button | |
Press MENU button. | button to move to | to move to ‘TEST | ||||
|
|
| ||||
|
| ‘Audio’ and then |
| TONE’ and then press | ||
|
|
|
| |||
|
|
| press ENTER button. |
| ENTER button. |
• The test tone will be sent to L ➝ C ➝ R ➝ RS ➝ LS ➝ SW in that order.
If the ENTER button is pressed again at this time, the test tone will stop.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
SETUP
When manually testing using the TEST TONE button | L: Front Speaker (L) | C: Center Speaker | SW: Subwoofer |
R: Front Speaker (R) | LS: Rear Speaker (L) | RS: Rear Speaker (R) |
Press TEST TONE button.
•Test tone will be produced as follows: When playing a DVD or CD, this will work only in Stop mode.
•Use this function to check that each speaker is correctly connected and that there is no problem.
To end the test tone, press TEST TONE button.
Start |
44