INSTRUCTIONSHEETNO.
\
IS:6582
INSTRUCTIONS FOR ASSEMBLING AND INSTALLING FIXTURE R1286m
EAD AND UNDERSTAND THESE INSTRUCTIONS BEFORE lNSTALLIN~ FIXTURE.
his fixture is intended for installation in accordance with the National Electrical Code and local or
!deral code specifications. To prevent electrical shock, turn off electricity at fuse box before proceeding.
etain these instructions for maintenance reference.
ACCORDANCE WITH UNDERWRITERS
LABORATORIES REQUIREMENTS, A LINE OF
CAULKING COMPOUND SUCH AS ACRYLIC
LATEX OR BUTYL MUST BE PLACED AROUND
THE BACK OF THE | FIXTURE, | AROUND THE |
GASKET IN ORDER | TO SEAL | OUT WATER. |
= |
| ‘0 |
Disassemble fixture by removing LATCH” SCREW visible at bottom, HOUSING “hinges” up for removal. See Fig. 2.
Attach CROSSBAR to OUTLET BOX with BOX
SCREWS.
Make connections | Black fixture | lead or fixture |
| |
lead without tracer mark to black supply lead; |
| |||
white fixture lead or fixture lead with tracer mark |
| |||
towhite eupplylead. | Attach | bare | GROUND WIRE |
|
to outlet box grounding screw (ortoothersyetem |
| |||
round). Use WIRE NUTS (local hardware item). | FIG. 1 | |||
~lace connections | in OUTLET | BOX, See Fig. 1. | ||
Secure FIXTURE BODY to OUTLET BOX by placing FIXTURE BODY over NIPPLE and threading KNOB tight againat FIXTURE BODY. See Fig. 1. FIXTURE must be mounted eo that SOCKET is at bottom of FIXTURE.
Mount diffuser HOUSING to FIXTURE BODY by tilting HOUSING to engage LUG into SLOT of
FIXTURE BODY. Swing HOUSING into position,
seating againet GASKET. See Fig. 2.
Preee HOUSING into alignment against GASKET
and secure with LATCH SCREW. See Fig, 2.
NOTE Mount with LATCH SCREW.
NOTE
;AUTION: MAXIMUM WAlTAGE AS MARKED ON
FIXIIJRE MUST N~ BE EXCEEDED.
HOUSING
LUG
SLOT
BACK.
PLATE
LATCH SCREW
~~
FIG. 2
[~BSECAUCfJS,NEW
lmlc31=lTc>lmBB | * | MO NT REAL, | QUEBEC, | C AN ADA |