Installation Instructions for Stacking
| Important | |
| 1. | Disconnect the power cord from the wall socket before attempting |
|
| installation. |
ENGLISH | 2. | For stacking installation, you must use the “bracket plate” which is |
| enclosed with this unit. | |
|
| |
| 3. | The maximum stacking height is two units. |
Stacking the two units is limited to the following models.
CAUTION : Be sure the oven cavity is empty.
Installation
1.Stack two units together.
2.Remove 6 screws as shown in the figure.
3.Place the
4.Attach and tighten 6 screws as shown in the figure here.
5.Ensure the top oven is at a safe and workable height.
Screw
Replacement of Lamp
Important
1.Remove a screw securing the lamp cover.
You don’t need to remove outer panel to replace lamp.
2.Remove the lamp by rotating it clockwise.
3.Replace with a new lamp by rotating it
Lamp | Lamp Holder |
Cover |
Lamp
Outer(230V 25W)
Panel
18
CM1529_XEU_04030A_EN.indd 18