USING THE CRUSTY PLATE
This crusty plate allows you to brown food not only on the top with the grill, but also the bottom of the food turns crispy and brown due to the high temperature of the crusty plate. Several items which you can prepare on the crusty plate can be found in the chart (see next page). The crusty plate can also be used for bacon, eggs, sausages, etc.
1. Place the crusty plate directly on the turntable and preheat it with highest
2. Brush the plate with oil if you are cooking food, such as bacon and eggs, in order to brown the food nicely.
3.Place the food on the crusty plate.
4. Place the crusty plate on the metal rack (or turntable) in the microwave.
5. Select the appropriate cooking time and power. (Refer to the table on the side)
Always use oven gloves to take out the crusty plate, as will become very hot.
Please note that the crusty plate has a teflon layer which is not
Do not place any objects on the crusty plate that are not 
Never place the crusty plate in the oven without turntable.
Clean the crusty plate with warm water and detergent and rinse off with clean water.
Do not use a scrubbing brush or a hard sponge otherwise the top layer will be damaged.
Please note that the crust plate is not dish
CONVECTION
The convection mode enables you to cook food in the same way as in a traditional oven. The microwave mode is not used. You can set the temperature, as required, in a range varying from 40 °C to 200 °C. The maximum cooking time is 60 minutes.
•Always use oven gloves when touching the recipients in the oven, as they will be very hot.
•You can get better cooking and browning, if you use the low rack.
Check that the heating element is in the horizontal position. Open the door and place the recipient on the low rack and set on turntable.
1.Press the Convection button.
Result: The following indications are displayed:
(convection mode) 180 °C (temperature)
2.Set the temperature by turning the Multi Function
Selector Dial.
(Temperature : 40~200 °C, 10 °C interval)
•If don’t set the temperature within 5 seconds, Automatically changes to the cooking time setting stage.
3. Press the Multi Function Selector Dial.
4. Set the cooking time by turning the Multi Function Selector Dial.
(If you want to preheat the oven, select “ : 0”)
5.Press the START/+30s button.
Result: Cooking starts:
• When cooking has finished, the oven will beep and flash “End” 4 times. The oven will then beep one time per minute.
04 OVEN USE