<SR10M702✴✴✴, SR10M703✴✴✴, SR20M70✴✴✴✴ series>
1 The information | 2 Turn off the |
code below is | emergency switch |
shown with an | and check the |
error alarm. | below instructions |
| and take |
| appropriate action |
3 Information code will disappear when you turn on the emergency switch
Information codes | Checklist | ||
|
|
| The POWERbot is caught, stuck or trapped while |
|
|
| |
|
|
| |
|
|
| moving around. |
|
|
| ffTurn off the emergency switch and move the POWERbot to |
|
|
| another area. |
|
|
|
|
|
|
| Foreign matter caught in the brush. |
|
|
| ffTurn off the emergency switch and remove the foreign matter |
|
|
| from the brush. |
|
|
|
|
|
|
| Foreign matter caught in the left Driving wheel. |
|
|
| ffTurn off the emergency switch and remove the foreign matter |
|
|
| from the Driving wheel. |
|
|
|
|
|
|
| Foreign matter caught in the right Driving wheel. |
|
|
| ffTurn off the emergency switch and remove the foreign matter |
|
|
| from the Driving wheel. |
|
|
|
|
|
|
| Foreign matter caught in the auto shutter tool. |
|
|
| ffTurn off the product by pressing the emergency switch and |
|
|
| remove the foreign matter from the auto shutter tool. |
|
|
|
|
|
|
| Bumper sensor needs to be checked. |
|
|
| ffTurn off the emergency switch and turn it back on. |
|
|
| ffWhen information code does not disappear, check if there's any |
|
|
| small foreign matter between the bumper and the main body. |
|
|
| If there is, pull the bumper slightly and remove the foreign |
|
|
| matter. |
|
|
|
|
|
|
| Foreign matter accumulated on the obstacle sensor. |
|
|
| ffTurn off the emergency switch and clean the front and rear |
|
|
| sensor with a soft cloth. |
|
|
|
|
|
|
| Foreign matter accumulated on the cliff sensor. |
|
|
| ffTurn off the emergency switch and clean the cliff sensor with a |
|
|
| soft cloth. |
|
|
|
|