Accessories
or
Remote control
(Not included with
SR10M701✴✴✴ Series )
Batteries (AAA type)
User manual
Spare filter
(Option)
Docking station
Power cord
Battery charger
Boundary markers
(Option)
✻✻Refer to page 15 for the installation of boundary markers.
Installation note
Note
ffInstall the docking station in a place where the floor and wall are level. ffIt is best to install the docking station along the grain of wooden floors.
ffIf the emergency switch is off, the POWERbot will not charge even if it is docked on the docking station.
ffAlways turn on the power of the docking station.
––If power is not supplied to the docking station, the POWERbot cannot find it and cannot automatically recharge.
––If the POWERbot is left detached from the docking station, the battery will drain naturally.
ffIf the POWERbot is in sleep mode, power will not come on even if the emergency switch is turned off and then on. Press and hold the [Start/Stop] button on the POWERbot to turn the sleep mode off.