ADJUST THE CLEARANCE BETWEEN THE DOORS
Making small adjustments between doors.
If the door of the freezer is lower than that of | If the door of freezer is higher than that of the |
the refrigerator. | refrigerator. |
Adjustment part | Adjustment part | |
Please open the doors and adjust the doors as follows: | ||
|
1) Release the nut (①) on the lower hinge until the upper end of the bolt (➁).
When you release the nut(①), use enclosed hex wrench (➂) to turn the bolt(➁) a little counter clockwise NOTA to make the nut(①) loose with your fingers.
➂WRENCH
➂WRENCH
➀ NUT |
| ➀ NUT | |
➁ BOLT | ➁ BOLT | ||
| |||
|
|
2)Please adjust the height difference between the doors turning the bolt (➁) turn clockwise( 
) or
counter clockwise ( 
).
When you turn clockwise ( 
), the door goes up.
NOTE
➂WRENCH
➂WRENCH
➁ BOLT | ➁ BOLT |
3)After adjusting the doors, turn the nut (①) turn clockwise( 
) until the lower end of the bolt, then tighten the bolt again with the wrench (➂) to fix the nut(①).
➂ WRENCH | ➂ WRENCH |
➀ NUT |
| ➀ NUT |
| ➁ BOLT | |
| ➁ BOLT | |
|
|
If you do not fix the nut (①) firmly, the bolt (➁) may be released.
NOTA
28