Samsung AR12NXWSAURNEU manual Remote Control Operation, Inserting batteries, Operation modes

Remote Control Operation

You can use the air conditioner easily by selecting a mode and then by controlling the temperature, fan speed, and air direction. For remote control buttons related to each operation, see the pages at the front of this manual.

At a Glance

Inserting batteries

two 1.5V AAA type batteries

NOTE

•The descriptions in this manual are primarily made based on the remote control buttons.

•Although Ionizer () and d’light Cool is displayed on the remote control display, it is not available on this model.

•For the multi system Ionizer () / d’light Cool / Single user are displayed on the remote control display, but these functions are not available.

1Operation modes

You can change the current mode between Auto,

Cool, Dry, Fan, and Heat by pressing the button.

1Controlling temperature

You can control the temperature in each mode as follows:

Mode	Temperature control
Auto/
Cool/	Adjust by 1 °C between 16 °C and 30 °C.
Heat
Dry	Adjust by 1 °C between 18 °C and 30 °C.
Fan	You cannot control the temperature.

NOTE

You can use the Cool, Dry, and Heat modes in the following conditions:

Mode	Cool	Dry	Heat
Indoor	16 °C to	18 °C to	27 °C or
temperature	32 °C	32 °C	less
Outdoor	-10 °C to	-10 °C to	-15 °C to
temperature	46 °C	46 °C	24 °C
Indoor	80% or less
	relative	_	_
humidity
	humidity

•If the air conditioner operates in a high humidity environment in the Cool mode for an extended period of time, condensation may occur.

•If the outdoor temperature drops to -15°C, the heating capacity may decrease to as much as 60% to 70% of the specified capacity.

•For more information about outdoor temperature in the multi system, refer to the manual for the multi system.

12English