Samsung AR12NXWSAURNEU, AR09NXWSAURNEU, AR07NXWSAURNEU manual Cleaning at a Glance

Cleaning at a Glance

Running Auto clean

		Select [Clean]	 The Auto clean functionis activated.
	•	The indoor unit display shows :	 When operation is off,auto clean starts
					for10 min.
					• The indoor unit display shows cleaning
					progress (from 1 to 99%).
			 The air conditioner is automatically
					turned off.
		To deactivate the Auto clean function		To cancel the Auto clean operation
		Slect [Clean]	Press the			button twice within 20 seconds.

NOTE

•When the air conditioner is off, the Auto clean function starts immediately; when the air conditioner is in operation, the Auto clean function starts as soon as the air conditioner stops running.

•If you starts a function while in the Auto clean operation, the Auto clean function is reset, and then is restarted when that function is stopped or completed.

Cleaning the indoor unit exterior and outdoor unit heat exterior

Tepid damp cloth
Soft brush
Before cleaning, be sure to turn off the equipment	Spray water to clean the dust.
and disconnect the power plug.

CAUTION

•Do not clean the display by using alkaline detergent.

•Do not use sulphuric acid, hydrochloric acid, or organic solvents (such as thinner, kerosene, and acetone) to clean the surfaces. Do not put any stickers on it as this can damage the surface of the air conditioner.

•When you clean and inspect the heat exchanger on the outdoor unit, contact the local service centre for help.

English 21

Cleaning and Maintenance