Samsung WF906U4SAGD/SG manual Information codes

troubleshooting and information codes

Information codes

If your washing machine malfunctions, you may see an information code on the display. If this happens, please check the table below and try the suggested solution before calling Customer Service.

CODE SYMBOL	SOLUTION
dE	•	Make sure the door is firmly closed.
	• Make sure that laundry is not caught in the door.
	• Make sure the source water tap is turned on.
4E	•	Check the water pressure.
	•	Clean the mesh filters of water hose.
	• Clean the debris filter.
5E	•	Make sure the drainage hose is installed correctly.
	• Clean the water hose mesh filter.
	• The laundry load is unbalanced. Redistribute the load. If only one item
UE		of clothing needs washing, such as a bathrobe or pair of jeans, the final
		spin result might be unsatisfactory and an “UE” error message will be
		shown in the display window.
cE/3E	•	Call the after-sales service.
	• This occurs when too much foaming is detected. It is also displayed
Sd/Sud		while foaming is removed. When the removal is finished, the normal
		cycle proceeds.(This is one of the normal operations. It is an error for
		preventing non-sensing faults.)
	• If the voltage of the supplied power is instable, the washing machine
Uc		will be paused to protect its electric devices.
	• If the correct voltage is supplied, the cycle will resume automatically.

For any codes not listed above, or if the suggested solution doesn’t fix the problem, call your Samsung Service Centre or local Samsung dealer.

38_ troubleshooting and information codes

WF906U4SA-03205T-03_EN.indd 38

2014/6/27 10:59:26