Removing Excess Humidity
M |
| FF |
OD | TURBO | |
E | O |
O | DE | TURBO | F |
| OF |
M |
|
| F |
O | DE | TURBO | |
| OF |
If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much.
1If necessary, press the (On/Off) button.
Result: ◆ The OPERATION indicator on the indoor unit comes on.
◆The air conditioner starts up in the mode selected when the unit was last used.
◆The indoor unit beeps.
IMPORTANT | The air conditioner is fitted with a protection mechanism | |
to prevent the unit from being damaged when it is started | ||
| ||
| immediately after being: |
◆Plugged in
◆Stopped
It will start up normally after a
2If the indication is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears.
Result: ◆ The indoor unit beeps each time you press | MO | DE . |
◆The air conditioner starts up in Dry mode. Note You can change modes at any time.
3 To adjust the temperature, press the or buttons one or more times until the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
Result: ◆ Each time you press or :
-The temperature is adjusted by 1°C
-The indoor unit beeps
◆The air conditioner starts removing the excess humidity;
the quantity of air is adjusted automatically.
4To control the direction of the air flow, refer to page 14.