Selecting Heat Mode
You can select Heat mode if you want to heat your room.
You can adjust the temperature and the fan speed when heating.
1Press the 
(On/Off) button.
Result: The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2Press the 
button on the remote control until Heat is displayed.
Result: | The indoor unit beeps each time you press the | button. |
| The air conditioner runs in Heat mode. |
|
Note | You can change modes at any time. |
|
3Press the 
button to adjust the temperature until the required temperature is displayed.
You can set the temperature between 16°C and 30°C.
Result: Each time you press the 
button: - The temperature adjusts by 1°C
- The indoor unit beeps
If the room temperature reaches the set temperature
(selected temperature+5°C), the air conditioner stops heating,but the fan is still operating.
The air conditioner starts heating, provided that the room temperature is lower than the desired temperature (selected temperature+3°C).
4Press the 
button to select the fan speed until the required setting is
displayed.
Auto Low Medium High
Result: Each time you press the 
button, the indoor unit beeps.
For the first 3~5 minutes, the fan may not operate to prevent cool air from flowing out of the indoor unit.
This helps to warm the air in your room sufficiently.
5To control the airflow direction, refer to page 20.