setting up your side-by-side refrigerator
Reattaching the Water Supply Line
1. Insert the water line 1 into the coupler 2 .
2 1
2.The Water Line must be fully Inserted to the center of transparent coupler to prevent water leakage from the dispenser.
3.Insert the clip in the install pack and check that it holds the line firmly.
Center of transparent
coupler
clip A (1/4”)
(6.35mm)
Reattaching the Front Leg Cover
Before attaching the cover, check water connector for leakage.
Replace the front leg cover by turning the three screws clockwise, as shown in the figure.
Front Leg Cover
Screw
01 SETTING UP
setting up _15