Filter Indicator 
When the filter indicator light is on, it is time to change the filter. Typically this happens about every 6 months.
After removing the old water filter and installing a new one (see page 18 for instructions on how to do this), reset the indicator status light by pressing the Ice Type button for about 3 seconds. The indicator will light again in about 6 months to let you know it is time to change your water filter.
When you do not use the water filter, press the Ice Type button for more than 5 seconds, the Filter indicator lamp and the Filter Change letters will be off.
Child Lock 
This icon will light up when you activate the Child Lock function by pressing the Power Cool button and the Fridge button simultaneously for 3 seconds. Press these two buttons
for 3 seconds again to reactivate.
Also,this button has another function.When this button is pressed for 3 seconds (lock indication lamp turn on),the heater for sweat control is off at a same time.If sweat is appeared around the cover dispenser or beverage station with this function,press this button for 3 seconds again.then,the light will turn off and the sweat control function will be performed.and all keys will be unlocked at a same time.
Cubed Ice, Crushed Ice and turnning the Ice maker off.
Enjoy cubed or crushed ice by selecting your preference | Ice type | |
from the digital control panel. If you don’t need ice, turn | ||
| ||
the feature off to save on water and energy consumption. |
| |
The Ice type light indicates the type of ice(or no ice) that is |
| |
currently chosen. |
|
CONTROLLING THE TEMPERATURE
Controlling the Freezer temperature
The freezer temperature can be set between
The temperature display will move sequentially from
Five seconds after the new temperature is set the display will again show the actual current freezer temperature. However, this number will change as the Freezer adjusts to the new temperature.
Controlling the Fridge temperature
The refrigerator temperature can be set between 7ºC (45°F) and 1ºC (34°F) to suit your particular needs. Press the Fridge button repeatedly until the desired temperature is shown in the temperature display.
The temperature control process for the Fridge works just like the Freezer process.
Press the Fridge button to set your desired temperature. After a few seconds, the Fridge will begin tracking towards the newly set temperature. This will be reflected in the digital display.
The temperature of the freezer or the refrigerator may rise from opening the doors too frequently, or if a large amount of warm or hot food is placed in either side.
This may cause the digital display to blink. Once the freezer and refrigerator return to their normal set temperatures the blinking will stop.
If the blinking continues, you may need to “reset” the refrigerator. Try unplugging the appliance, wait about 10 minutes and then plug back in.
02 OPERATING
operating _25