Samsung VP-M2100S/SED, VP-M2100B/XET, VP-M2100BMEM manual Troubleshooting, Self Diagnosis Display

ENGLISH

Troubleshooting

Self Diagnosis Display

Display	Informs that…	Action				...
Not enough free space	Not enough free space for	Check the space of internal memory or the
	saving files.	external memory.
Corrupted file	The file is corrupted.	Delete the corrupted file.
Paper error	The paper is insufficient.	Check the paper in the printer. If there is no
		paper, insert the paper.
Printer error	The paper is caught in the	Check that paper is caught in the printer.
	printer.	Pull out the caught paper.
Ink error	Ink is low.	Check if the ink or toner is low.
File error	The file is wrong.	Check that the file is JPEG.
Communication Error	The error is occurred while	Disconnect the USB cable and connect it						JPEG
	transferring data.	again.
							USB
Sleeping now...	Power saving mode works.	Press any button to return to previous menu.
				...
Low battery	Battery is low.	Charge the Battery Pack or connect the AC
		Power Adapter.
Holding the key	The HOLD switch is locked.	Unlock the HOLD switch and operate the
					HOLD		HOLD
		CAM.
Card error	The Memory Card is	Format the Memory Card or replace it with
	corrupted.	new one.
Not formatted	Format the Memory Card.	Format the Memory Card.
Write error	Failed to write.	Check the memory space or format the
		memory.
Read error	Failed to read.	Delete the file.
Not supported format	The format is not supported.	The AVI or JPEG file that is not supported.
							AVI	JPEG
		Check the supported file. on page 29.					29
Write protected	Memory Card is protected to	Unlock the Memory Card. (except MMC)
								MMC
	write.
			MPEG
MPEG decoding Error	The video file is corrupted.	Delete the corrupted file.
✤ If these instructions do not solve your problem, contact your nearest Samsung dealer			✤				Samsung	/
or authorized service centre/personnel.
Symptom	Possible Causes	Measure
No power is supplied	The power is not connected	Connect the AC Power Adapter properly,						23
	properly	page 23
	The battery is dead	Replace the dead Battery Pack
	The battery is too cold	Warm up the battery or move to warmer
		place
			/		/		/	92-93
Date/Time is wrong	The Date/Time is not set	Set the Date/Time, pages 92-93

125