
*Disassemble as the picture (refer to the Set disassembly diagram) and remove the current battery from BAT1, then insert the new battery.
-Pull back the holder on the left of the battery
-Hold both sides and remove the battery
-Replace with the new battery
>no-power
NO-POWER
Is the power cord connected?
Yes
Is the Power switch turned on?
Yes
Check the
(Contact a service center.)
No
No
Connect the power cord.
Turn on the Power Switch
Complete
> No - Sound
No - Sound
Is the speaker cable
connected?
Yes
Is the volume level normal?
(Refer to uVending
management Software.)
Yes
Check the
(Contact a service center.)
No
No
Connect the speaker cable.
Increase the volume.
Complete
uVending - English
14