Samsung RS21FCSW1/LIB Connecting to water supply line, Connect the water line to the refrigerator

Page 30

INSTALLING OF THE WATER DISPENSER LINE

For Interior Model (Case 1)

Connecting to water supply line

- Shut off the main water supply line and turn the Ice maker to the off position.

- Locate the nearest cold drinking water line.

- Follow the instructions in the ice maker installation kit.

1.Cold Water line

2.Pipe Clamp. 3.Copper (or Plastic) line 4.Compression Nut 5.Compression Sleeve 6.Shut Off Valve 7.Packing Nut.

Connect the water line to the refrigerator

-Slip the compression nut and plastic ferrule through the plastic tube.

-After inserting the sleeve, tighten the compres-sion nut onto 1/4” compression fitting(union).

Do not overtighten the compression nut.

NOTE

-Slip the compression ferrule and nut on copper(or plastic) tubing as shown.

Tighten the comperssion nut onto the com-pression fitting(union).

- Turn water on and check for any leakege.

Compression

Nut

Ferrule

Sleeve

Compression fitting

Ferrule

Compressi on Nut

Waterline must be connected to drinkable water only

NOTE

(Case 2)

Check the water supply line

Connect the water pipe with coupler and tap.

-Close the main water tap.

-Connect coupler “A” to the tap.

-Every join should be protected with sealing tape.

WARRANTY INFORMATION

This water line installation is not covered by the refriger-ator or ice maker manufacturer's warranty.

Follow these instructions carefully to minimise the risk of expensive water damage.

Note:

If the coupler does not fit on the current tap, go

the nearest authorised service dealer and purchase

the right couplers fittings.

CAUTION

The water line must be connect-ed

to the cold water pipe.

If it is connected to the hot water

pipe, it may cause the purifier to malfunction.

COUPLER “A”

TAP

30

Image 30

Contents Side by Side Safety Warnings Other Symbols UsedSafety Warning Setting UP the Refrigerator Major FeaturesControl Panel Basic Model Dispenser ModelBasic Model With CoolSelect Zone Dispenser Model With CoolSelect ZonePower Freeze Digital PanelWater Dispenser Temperature ControlIce Dispenser Cold WaterFix the water supply device tightly into the fixing hole Set the locking device to the LockInstalling a Regular Bottle Water Tank / Supply DeviceShelves and Bins FreezerDoor Bin Food Storage GuideTempered Glass Shelf Plastics DrawerChilled Food Storage in Refrigerator Chill Select button OptionalSoft Freeze CoolQuick Cool button Thaw buttonRemoving the Freezer Accessories Cleaning the Accessories Changing the Interior Light Deodorizer optionalOrdering replacement filters Water Filter Indicator lightUsing the dispenser without the water filter Water FilterInstallation of the Refrigerator Checking the Dimensions of your Entrance DoorSelecting the Location for the Refrigerator Removing the Front LEG Cover Removing the Front Leg Cover OptionalRemoving the Refrigerator Doors Removing the Freezer DoorRemoving the Refrigerator Door Reattaching the Refrigerator Doors Reattaching the Freezer DoorReattaching the Refrigerator Door Reattaching the Water Tube Optional Reattaching the Front Leg Cover Optional Please level the refrigerator first Doors will be uneven if the refrigerator is not levelAdjust the Clearance Between the Doors Checking the Water Dispenser Line Optional Checking the PartsConnecting to water supply line Connect the water line to the refrigeratorCheck the water supply line Install the water filter Secure the water lineWarranty Information Connect to the water supply lineConnect the water line to the refrigerator Remove any residual matter inside the water supply line Check the amount of water supplied to the ice trayTroubleshooting English

Related manuals