Samsung Comprehensive Guide to SDC35701 Washer Error Codes and Solutions

INFORMATION CODES

Information codes may be displayed to help you better understand what is occurring with your Dryer.

ERROR DISPLAY	MEANING	SOLUTION
tE2	Clogged filter case is restricted.	Clean the filter case or condenser.
		If the problem continues call for service.
tE4
dE	Running the dryer with door open	Close the door and then restart.
		If the problem continues call for service.
dF	Door is not closing properly	Call for service.
bE	Button stuck for more than 30 secs	Make sure a button is NOT being
		pressedcontinuously. Try restarting the cycle.
		If the problem continues, call for service.
hE	Clogged filter case is restricted.	Clean the filter case or condenser.
	Invalid heating Temp when running	If the problem continues call for service
	the dryer.
Et	EEPROM is not communicating	Try restarting the cycle.If the problem
	properly	continues call for service.
3E	The motor does not work properly.	Try restarting the cycle.If the problem
		continues call for service.
5E	The water tank is full of water.	Empty the water tank and start again.
	The drain pump is out of order.	If the problem continues call for service.

For any codes not listed above, or if the suggested solution doesn’t fix the problem, call your Samsung Service Centre or local Samsung dealer.

05 TROUBLESHOOTING

troubleshooting _29

SDC14709-02885C-08_EN.indd Sec4:29 2013-03-29 ￿￿ 10:36:21