Lightolier VRA2G18LP332 dimensions Options & Accessories, Specifications

SECTION 2/Folio G05-64 REV. A

	VR PARABOLIC VRA2G18LP332
Page 2 of 2	2'x4' RECESSED FLUORESCENT, 4" DEEP, 18 CELL (3x6) PARABOLIC LOUVER
	STATIC OR AIR SUPPLY/RETURN, IES RP1 FOR NORMAL VDT USE

PHOTOMETRY

		LER = FP - 55.0			WATTS - 85				BF - 0.85
MODEL NO. VRA2G18LP332O3 Comparative yearly lighting energy cost per 1000 lumens = $4.36
		coefficients of utilization — zonal cavity method									(effective floor cavity reflectance 0.20)
			RF		20						20					20
		RC			80						50					30
		RW		70	50			30		50	30	10		50		30	10
		ratio	1	72	70			68		66	65	63		64		62	61
			3	63	58			54		55	52	49		53		51	48
			2	67	64			60		60	58	56		58		56	54
		cavity	4	58	52			48		50	46	44		49		46	43
			5	54	48			43		46	42	39		45		41	38
		room	6	51	44			39		42	38	35		41		37	35
			8	44	37			32		35	31	28		35		31	28
			7	47	40			35		38	34	31		38		34	31
			9	42	34			29		33	29	26		32		28	26
			10	39	31			27		30	26	24		30		26	24
		visual comfort probability					(rated lumens per lamp 3150.)
		room size						ceiling height						ceiling height
		W		L	8.5			10.0	13.0	16.0			8.5	10.0	13.0	16.0
		20		20			90	86	79	79			98	96	97	93
	20			30			92	88	83	78			98	97	97	94
	20			40			92	89	86	81			98	97	97	94
	20			60			93	90	87	83			98	97	97	94
		30		20			90	86	84	82			98	97	97	92
	30			30			92	89	86	81			98	97	97	94
	30			40			93	90	88	83			98	97	97	94
	30			60		lengthwise	93	91	89	85		crosswise	98	97	97	94
	40			40			93	91	88	84			98	97	97	93
	30			80			93	91	90	86			98	97	97	94
		40		20			90	86	84	85			98	97	97	92
	40			30			93	90	86	84			98	97	97	93
	40			60		luminaries	94	91	90	86		luminaries	98	97	97	94
	40			80			94	91	90	87			98	97	97	94
	40			100			94	91	90	88			98	97	97	94
		60		30			93	90	86	83			98	97	97	93
	60			40			93	91	89	84			98	97	97	93
	60			60			94	92	90	87			98	97	97	94
	60			80			94	92	90	88			98	97	97	94
	60			100			94	92	91	88			98	97	97	94
		100		40			93	91	89	84			98	97	97	94
	100			60			94	92	90	87			98	97	97	94
	100			80			94	92	91	88			98	97	97	95
		100		100			93	92	91	89			97	97	97	95

ORDERING INFORMATION

Explanation of Catalog Number. Example: VRA2G18LP332120SOGLR

VR

BODY STYLE:

A=Air Handling

S=Static

VR:

4" Deep

Pre-anodized

Aluminum

Louver

For Normal

VDT Use

2			18			P
	CEILING TYPE:				LOUVER
	G= Grid				FINISH*:
		(lay-in T bar)		L=Low
FIXTURE	F=Flanged		NUMBER OF		Iridescence
						DUAL “V”
	(overlap)				Semi-specular
WIDTH		Z spline and	CELLS:		(standard)	REFLECTOR
		plaster frame	(3 rows of	P=Low
	T=Slot grid or		6 cells)		Iridescence
		two-directional			Specular

concealed T (see options)

3

LAMP

QUANTITY

LAMP TYPE/

FIXTURE

LENGTH: 32=T8

34=T12

VOLTAGE:				OPTIONS:
120 or 277			Add appropriate
			suffix to catalog
				no, ie: (GLR)
	BALLAST TYPE:
1 & 2 Lamp Mag.			LE		<10THD
		<20THD
1 & 2 Lamp Elec. T8			SO*			HI*
1-3 Lamp Elec. T8			O3*			H3*
LOL T8 Dimming			PS			–

*Instant Start Standard

Other dimming options. Consult factory.

OPTIONS & ACCESSORIES

PLASTER FRAME: Catalog Number: PF24.

CONTINUOUS ROW INSTALLATION: For F type fixtures, half-width flanges are

required between fixtures, Order Catalog Number: S2FCTRIM (each joint).

SPLAY TRIM: For T ceiling type only. SUFFIX: CTZ24 S2 SPLAY TRIM.

RADIO INTERFERENCE FILTER: 120 or 277 volt, 50 or 60 Hz. One per fixture

standard. SUFFIX: RF.

ELECTRICAL WIRING OPTIONS: Consult factory.

AIR CLOSURE STRIP: SUFFIX ACS4 (factory installed).

DRYWALL KIT: Order Catalog Number: FK92X4. Request Folio OA30-10.

CHICAGO PLENUM: SUFFIX: CP.

SPECIFICATIONS

PERFORMANCE: In an installation of 3 lamp 32W luminaires in a room cavity ratio of 1, reflectance 80% ceiling, 50% wall, 20% floor, the C.U. shall not be less than .70 with a spacing to mounting ratio of 1.4 perpendicular to the lamps. To meet IES RP1 recommended (basic) requirements for VDT areas the VCP (visual comfort probability) shall not be less than 94 either crosswise or lengthwise and the maximum average brightness at 65°, 75° and 85° shall not exceed 304, 147, and 0 candelas per square meter respectively in the 0°, 45°, and 90° horizontal planes.

SPECIFICATIONS (continued)

AIR HANDLING: (VRA only) side air passages for air supply or air return. Optional side closure strips. Air return is also provided through the lamp com- partment through fixture body ends.

MATERIALS: Chassis parts are die-formed embossed cold rolled steel. Housing side rails hemmed over and housing ends turned-in for safe handling. LOUVER: Pre-anodized aluminum (Coilzak@ or equal).

FINISH: Chassis exterior–black baked polyester enamel. Cavity–white baked polyester enamel minimum 86% reflectance. Phosphate undercoating. Louver–low iridescence semi-specular anodized vertical grain aluminum reflec- tor sheet is standard.

ELECTRICAL: Thermally protected class “P” ballast C.B.M. approved, non PCB. If K.O. is within 3" of ballast, use wire suitable for at least 90°.

LABELS: I.B.E.W./UL and C-UL.

Job Information	Type:
Lightolier a Genlyte Thomas Company	www.lightolier.com

Technical Information: (978) 657-7600 • Fax (978) 658-0595

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2002 Genlyte Thomas Group LLC (Lightolier Division) A0902