Manuals / American Power Conversion / Computer Equipment / Power Supply

American Power Conversion AP9222EXP manual Specifications, Product

Models: AP9222EXP AP9222

1 43

Download 43 pages 30.31 Kb

Page 39

Product Information

Specifications

Product	The following table shows the product specifications for the
specifications	MasterSwitch VM power distribution unit (AP9222).
(AP9222)
(AP9222)		Item		Specification
		Item		Specification

			Electrical

		Input:
		Nominal input voltage		100–230 VAC
		Acceptable input voltage		90–250 VAC
		Nominal input frequency		50/60 Hz
		Input connector		IEC 60320-C20 appliance inlet

		Output:		8 IEC 60320-C13 individually
		Output connectors		8 IEC 60320-C13 individually
		Output connectors		managed
				managed

		Maximum total current draw:		Without loads: 0.2 Amps

			Physical

		Size (H × W × D)		47.0 x 1.75 x 1.75 in.
		Size (H × W × D)		(119.38 x 4.45 x 4.45 cm)
				(119.38 x 4.45 x 4.45 cm)

		Weight:		6.0 lb (2.3 kg)

		Shipping weight:		8.0 lb (3.6 kg)

		Environmental

		Elevation (above MSL):
		Operating		0 to 10,000 ft (0 to 3000 m)
		Storage		0 to 50,000 ft (0 to 15 000 m)

		Temperature:
		Operating		32 to 104° F (0 to 40° C)
		Storage		32 to 113° F (0 to 45° C)

		Operating Humidity:		0 to 95%, non-condensing

			Approvals

		EMC verification:		FCC Class A, VCCI, CISPR 22
		EMC verification:		Class A, C-Tick
				Class A, C-Tick

		Safety Agency:		UL, CSA, VDE

Continued on next page

MasterSwitch VM User’s Guide

34

Image 39

American Power Conversion AP9222EXP manual Specifications, Product, Following table shows the product specifications for

Contents

MasterSwitch VM Thank You Contents MasterSwitch VMContents Life-Support Policy Warranty InformationTroubleshooting SpecificationsFeature Description IntroductionProduct Description Introduction MasterSwitch VM ControllerStatus Description LEDsOperating MasterSwitch VM Configuring outlets for operation Is turned on When these two delays expire, the outlet will be turned on Outlet will be turned on Overload Warning and the load exceeds the Overload Warning Outlets do not turn on when the Overload WarningOutlets always turn on Threshold has been exceededManagement Interfaces Managing MasterSwitch VMTelnet, for remote management Managing MasterSwitch VMControl Console InterfaceManaging MasterSwitch VM Outlets and menu Password-Protected AccountsAccount access to Account, and up to 16 Outlet User accountsOutlets Menu ItemsOutlets Menu ItemsUnit Configuration MasterSwitch VMOutlet Configuration Links Event Log Interface or by pressing C TRL + L in the Control ConsoleDir. You will see a listing similar to the following ftpdir However, you may need to select a four-digit date format MasterSwitch VM unit always uses four-digit yearRepresentation when logging and displaying event data Similar to the followingTCP/IP NetworkSnmp Access Control Telnet/WebDefinition Trap Receiver IP to Snmp Trap ReceiverSystem User ManagerItems Outlet User ManagerFor Outlet User Manager Identification Date/TimeFile Transfer Tools Enable BootpHelp Security Security FeaturesSecurity AuthenticationMethods Interface Security AccessProduct Information Warranty InformationProduct Information TroubleshootingLife-Support Policy Product SpecificationsFollowing table shows the product specifications for MasterSwitch VM power distribution unit AP9222AP9221NX166 MasterSwitch VM Controller AP9221NX166Index Help FeaturesIndex Regional centers APC Worldwide Customer Support