![](/images/new-backgrounds/1324741/32474117x1.webp)
Connecting External Components
Connecting an External Analog Component
Example: Analog signal components such as a VCR.
Audio Cable
(not supplied)
If the external analog compo- nent has only one Audio Out, connect either left or right.
1 Connect AUX (Audio) In on the Home Theater to Audio Out on the external analog component.
•Be sure to match connector colors.
2 Press AUX button on the remote control to select ‘AUX’ input.
• You can also use the FUNCTION button on the main unit. The mode switches as follows: FM ➝ DVD/CD ➝ AUX
Note | • You can connect the Video Output jack on your VCR to the TV, and connect the Audio |
| Output jacks on the VCR to this product. |
Connecting the FM Antenna
FM Antenna (supplied)
1 Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal.
2 Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.
Note | • This unit does not receive AM broadcasts. |
GB
CONNECTIONS
15 | 16 |