Troubleshooting
Before requesting service (troubleshooting), please check the following.
| Problem |
| Action | Page | ||
|
|
|
|
|
| |
|
| • | Check the batteries in the remote control. |
|
| |
No operations can be |
| They may need replacing. |
|
| ||
• | Operate the remote control at a distance of no more than 20 feet. | P3 | ||||
performed with the | • | Remove batteries and hold down one or more buttons for several minutes to drain | ||||
|
| |||||
remote control. |
| the microprocessor inside the remote control to reset it. Reinstall batteries and try |
|
| ||
|
|
| to operate the remote control again. |
|
| |
|
|
|
|
| ||
Disc does not play. | • | Ensure that the disc is installed with the label side facing up. | P5 | |||
|
| • | Check the region number of the DVD. |
|
| |
|
| • 5.1 channel sound is reproduced only when the following conditions are met. : |
|
| ||
5.1 channel sound is |
| 1) The DVD player is connected with the proper Amplifier | ||||
| 2) The disc is recorded with 5.1 channel sound. | |||||
not being reproduced. | • | Check whether the disc being played has the “5.1 ch” mark on the outside. |
|
| ||
|
|
|
| |||
|
| • | Check if your audio system is connected and working properly. | P24 | ||
|
| • | In a SETUP Menu, is the Audio Output set to Bitstream? | |||
|
|
|
| |||
|
| • | The features or action cannot be completed at this time because: |
|
| |
The | icon appears | 1. The DVD’s software restricts it. |
|
| ||
2. The DVD’s software doesn’t support the feature (e.g., angles). |
|
| ||||
on screen. |
|
| ||||
3. The feature is not available at the moment. |
|
| ||||
|
|
|
| |||
4.You’ve requested a title or chapter number or search time that is out of range. Disc Menu doesn’t appear. • Check if the disc has a Menu.
Play mode differs from the | • | Some of the functions selected in the Setup Menu may not work properly if the | |||
Setup Menu selection. |
| disc is not encoded with the corresponding function. |
| ||
The screen ratio | • | The Screen Ratio is fixed on your DVDs. | |||
cannot be changed. | |||||
No audio. | • | Make sure you have selected the correct Digital Output in the Audio Options | P24 | ||
|
| Menu. |
| ||
|
|
|
| ||
The screen is blocked | • | Press the | button (in front panel) for more than 5 seconds under no disc |
| |
|
| inside. All settings will revert to the factory settings. | P14 | ||
|
|
|
| ||
Forgot password | • | Press the | button (in front panel ) for more than 5 seconds |
| |
|
| under no disc inside. All settings including the password will revert to the factory |
| ||
|
| settings. Don't use this unless absolutely necessary. | P25 | ||
|
|
|
| ||
|
|
|
| ||
| • | Go to the contents and find the section of the instruction book that contains the |
| ||
If you experience |
| explanations regarding the current problem, and follow the procedure once again. |
| ||
other problems. | • | If the problem still cannot be solved, please contact your nearest authorized ser- |
| ||
|
| vice center. |
|
| |
|
|
|
| ||
The picture is noisy or | • | Make sure that the disc is not dirty or scratched. | P2 | ||
distorted | • | Clean the disc. | |||
| |||||
28