Samsung DVD-VR375/EDC Basic VCR Recording, Before starting, Maximum Recording Time SP vs. LP

7. Turn the power off by pressing the STANDBY/ON button to		Timer - Standard									12:00
activate the timer list setting.	No.		Media		Date	Start	End	Prog. Mode		PDC	Edit
										/VPS
8. Refer to pages 63~64 if you want to	01		---		--/--	--:--	--:--	----	---	--	►
	02		No.01								►
- Check whether the timer Recording has set correctly or not.			---		--/-- --:--		--:--	----	---	--
	03		Media		Date	Start	End Prog. Mode			PDC	►
- Cancel a preset recording.			---		--/-- --:--		--:--	----	---	/VPS--
	04		DVD		Today 12 : 00 12 : 11 Prog. 1				SP Off		►
			---		--/--	--:--	--:--	----	---	--
	05		---		--/-- --:--		--:--	----	---	--	►
				ShowView
	06		---		--/-- --:--		--:--	----	---	--	►
M  The numbers next to each TV programme listing in the magazines or	> Adjust				<Move			rReturn		eExit
newspapers are ShowView code numbers, which allow you to
programme your DVD Recorder & VCR. instantly with the remote control. Enter the ShowView code for the
programme you wish to record.

ShowView is a trademark of Gemstar Development Corporation.

The ShowView system is manufactured under licence from Gemstar Development Corporation.

BASIC VCR RECORDING

Before starting

1.Check TV channel and Antenna connections.

2.Check the remaining time on the tape.

You can record a TV show in progress by inserting a blank tape and pressing the  (REC) button. You can even add time in preset increments up to 6 hours by pressing the  (REC) button repeatedly.

M Be sure your videotape has a Record Safety Tab. If the tab is missing, you can cover the opening with a small piece of tape.

J Warning : Do not cover this opening unless you are sure you want to record over the tape.

1.Insert a blank VHS tape into the VCR deck.

•Make sure the tape is long enough to record the entire programme.

2.Press the Number buttons or the PROG/TRK (,/.) buttons to select the desired channel. Press the INPUT SEL. button to select Prog.1, AV1, AV2, AV3 or DV input (DVD-VR375 only). if recording from an external device connected to the input jacks of the recorder.

3.Press the REC SPEED button on the remote control to set the Record Speed to one of the following options:

•SP – Standard Play, for best picture quality.

•LP – Long Play, for maximum recording time (2 times SP).

M The selected Record Speed will appear on the front panel display and on-screen display.

Maximum Recording Time - SP vs. LP

Tape Length	SP (Standard Play)	Recording Times Data Rates
E180	Approx. 3 hrs	Approx. 6 hrs
E240	Approx. 4 hrs	Approx. 8 hrs
E260	Approx. 4 hrs 40 mins	Approx. 9 hrs 20 mins
E300	Approx. 5 hrs	Approx. 10 hrs

● RECORDING

English _65